Overview
The Rugged Ridge 17235.72 Etched Lower Switch Panel Kit is a center console switch pod for 2007-2010 Jeep Wrangler JK models equipped with automatic transmissions. It is a direct replacement for the original equipment filler plate in the console and holds five 2-position laser-etched rocker switches.
Each switch is labeled for a light function: Zombie Lights, Light Bar Lights, Sasquatch Lights, Rock Lights and Off-Road Lights. The panel suits owners who want those lighting controls grouped in one console location.
Key features
- Direct replacement for the original equipment center console filler plate
- Five 2-position rocker switches with laser-etched labels
- Labels for Zombie Lights, Light Bar Lights, Sasquatch Lights, Rock Lights and Off-Road Lights
- Designed for 2007-2010 Wrangler JK models with automatic transmissions
Console installation and wiring
The console filler plate is the piece this kit replaces, and it is usually held in place by clips or screws around the edge. Work slowly around the surrounding trim, since older plastic can crack if pried too hard. Set the new panel in dry-fit first to check that every switch sits level and the panel seats flush before running any wires.
A five-switch panel means five circuits to plan. Each switch should feed a fused circuit sized to the light it controls, and the harness should be secured away from the shifter and the console’s moving parts. Keep the labels matched to the switches so the functions are easy to identify while driving.
- Check that the shifter boot still seats after the panel is set in
- Route wiring to avoid pinching under the console lid
- Test each switch with the engine running before closing up
Specifications
| Brand | Rugged Ridge |
|---|---|
| Part number | 17235.72 |
| UPC | 804314297398 |
| Product type | Center console switch panel kit |
| Switches included | Five 2-position laser-etched rocker switches |
| Switch labels | Zombie Lights, Light Bar Lights, Sasquatch Lights, Rock Lights, Off-Road Lights |
| Transmission | Automatic |
Vehicle fitment
The kit is made for 2007-2010 Jeep Wrangler JK models with automatic transmissions, where it replaces the original equipment filler plate.
Wrangler JK models with manual transmissions and other Wrangler generations, such as the TJ and LJ, fall outside this fit. Match your vehicle’s year, model and trim to the fitment before ordering.
Installation notes
The panel replaces the factory filler plate, so remove the existing filler before fitting the new panel. Plan the harness for the five switches before starting, and disconnect the battery before working on the console wiring.
What’s included
The kit includes the center console switch panel and five 2-position laser-etched rocker switches.
Not included: the lights the switches control and their wiring are separate parts and are not part of this kit.









