Overview
The Rugged Ridge 18006.55 is a drop pitman arm for power steering. It helps reduce the angle of the drag link and reduce bump steer created when a suspension lift is installed.
It suits 2 and 4-door models with a 3.5-6 inch lift.
Key features
- 4 inch drop
- Helps reduce drag link angle
- Helps reduce bump steer after a suspension lift
- Power steering application
Steering after a lift
A drop pitman arm lowers the connection between the steering gear and the drag link. That change reduces the angle the drag link runs at after a suspension lift, which helps limit bump steer. Lift height and the arm’s drop work together, so an arm sized for one lift range may not suit another.
After installing any drop arm, have the steering and alignment checked. Look at the drag link and tie rods for wear, since lifted vehicles place more load on them. Watch for steering wander, uneven tire wear or a shimmy at speed, and address those symptoms before extended trail use. Keep the steering stops and gear mounting in view during the first test drive.
- Check drag link and tie rod ends for play
- Recheck gear mounting after the first drive
- Confirm alignment once the lift is complete
Specifications
| Brand | Rugged Ridge |
|---|---|
| Part number | 18006.55 |
| UPC | 804314166014 |
| Drop | 4 inches |
| Lift range | 3.5-6 inch |
| Steering type | Power steering |
| Models | 2 and 4-door |
Vehicle fitment
This pitman arm suits lifts of 3.5-6 inches on 2 and 4-door vehicles. Confirm the make, model and year before ordering.
Measure your lift height and confirm it falls in the 3.5-6 inch range. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A drop pitman arm changes steering geometry, so have the steering and alignment checked after the lift is installed.





















