Receiver Hitches
Showing 61–72 of 151 resultsSorted by popularity
-
Receiver Hitches
Curt Manufacturing Class III 2″ Receiver Hitch – 13367
- Rear-mount Curt Class III/IV receiver hitch, part number CRT13367
- Fits 2007-2014 Toyota FJ Cruiser Base, TRD Special Edition and Trail Teams Special Edition trims
- 2 inch by 2 inch receiver, no-drill installation
- Does not fit with a roll pan
SKU: CRT13367 -
Receiver Hitches
Curt Manufacturing Class III 2″ Receiver Hitch – 13359
- Fits Ford F-150, F-250 and F-350 Super Duty trucks from 1997 to 2016
- Class III round tubular receiver hitch with no-drill installation
- Aimed at trailers above 4,000 and below 10,000 pounds GTW
- Curt Manufacturing part number CRT13359
SKU: CRT13359 -
-
Receiver Hitches
Curt Manufacturing Class III 2″ Receiver Hitch – 13281
- Curt Manufacturing Class III 2-inch receiver hitch, part number CRT13281
- Fits the 2017-2019 Kia Sportage in EX, LX and SX Turbo trims
- 2-inch receiver size and Class III weight class
- Confirm weight ratings and hardware needs before installing
SKU: CRT13281 -
-
-
Receiver Hitches
Curt Manufacturing Class III 2″ Receiver Hitch – 13201
- Fits the 2009–2018 Dodge Journey in AVP, Base, Crew, Crossroad, Express, GT, Limited, Lux, Mainstreet, R/T, SE and SXT trims
- Curt Manufacturing CRT13201 Class III rear receiver hitch with a 2 Inches X 2 Inches receiver
- No-drill design and Class III/IV weight class
- Gloss black powder coat finish
- Does not fit with a roll pan
SKU: CRT13201 -
Receiver Hitches
Curt Manufacturing Class III 2″ Receiver Hitch – 13200
- Fits the 2014–2019 Toyota Highlander in Hybrid LE, Hybrid Limited, Hybrid XLE, LE, LE Plus, Limited, SE and XLE trims
- Curt Manufacturing CRT13200 Class III rear receiver hitch with a 2 Inches X 2 Inches receiver
- Drill-free installation, Class III/IV weight class
- Gloss black powder coat finish
- Does not fit with a roll pan
SKU: CRT13200 -
Receiver Hitches
Curt Manufacturing Class III 2″ Receiver Hitch – 13194
- Made for the 2015–2019 Lincoln MKC in Base, Black Label, Premiere, Reserve and Select trims
- Curt Manufacturing CRT13194 Class III rear receiver hitch with a 2 Inches X 2 Inches receiver
- No-drill installation with a Class III/IV weight class
- Gloss black powder coat finish
- Does not fit with a roll pan
SKU: CRT13194 -
Receiver Hitches
Curt Manufacturing Class III 2″ Receiver Hitch – 13172
- Fits the 2014–2018 Jeep Cherokee, including the 2018 Latitude, Limited, Overland and Trailhawk trims
- Curt Manufacturing Class III 2-inch receiver hitch, part number CRT13172
- Round tubular rear mount with a 2 inch by 2 inch receiver
- Gloss black powder coating and no-drill installation
- Hitch ball, ball mount and hitch pin not included
SKU: CRT13172 -
Receiver Hitches
Curt Manufacturing Class III 2″ Receiver Hitch – 13171
- Fits the 2014–2019 Jeep Cherokee, including the KL generation and 2016 XL Overland
- Curt Manufacturing Class III 2-inch receiver hitch, part number CRT13171
- Round tubular rear mount with a 2 inch by 2 inch receiver
- Gloss black powder coating and no-drill installation
- Ball, ball mount and hitch pin must be added separately
SKU: CRT13171 -
Receiver Hitches
Curt Manufacturing Class III 2″ Receiver Hitch – 13153
- Fits the 2013–2018 Hyundai Santa Fe and 2019 Santa Fe XL on the manufacturer fitment list
- Curt Manufacturing Class III 2-inch receiver hitch, part number CRT13153
- Rear mount with a 2 inch by 2 inch receiver opening
- Designed by Curt for trailers over 4,000 pounds GTW and under 10,000 pounds
- Hitch ball, ball mount and hitch pin not included
SKU: CRT13153
Understanding hitch classes
Hitches are grouped by class according to their rated gross trailer weight and tongue weight. Class III hitches are common on SUVs, half-ton trucks and Jeeps, while Class IV and V hitches are built for heavier trailers and larger trucks. Receivers are normally 1.25 inch or 2 inch square, and Class III and above generally use 2 inch. A higher class does not raise your vehicle's tow rating, because the lowest-rated component in the whole system sets the limit.
Specifications to check
- Gross trailer weight (GTW): The maximum total trailer weight the hitch is rated for.
- Tongue weight (TW): The downward force on the ball, typically around 10 to 15 percent of trailer weight for conventional trailers.
- Receiver size: Confirm it matches your ball mount, bike rack or accessory shank.
- Weight-distributing rating: Some hitches carry different ratings with and without a weight-distribution system.
- Mount location: Rear hitches are standard, while front receivers are sold as separate designs.
Fitment and compatibility
Direct-fit hitches are made for a particular chassis, with bolt holes that line up with factory frame points. Bumper cutouts, exhaust routing, spare tire carriers and roll pans can interfere, and some listings note whether the hitch fits with a roll pan. Always confirm fitment for your exact year, make and model, and check the manufacturer's specifications and your owner's manual for the vehicle's tow rating.
Installation notes
Most bolt-on hitches install with basic hand tools and a helper, but they carry a lot of load, so fastener quality and torque matter. Use the supplied hardware, tighten to the specified torque, and recheck after the first drive. Clean and treat any weld seams or drilled areas against rust. Wiring for trailer lights is a separate harness. If you are unsure about any step, have the hitch installed by a professional, and inspect it periodically for cracks, loose bolts and corrosion.
Check the fine print when you pair a hitch with accessories. A ball mount, pin, coupler and chains each carry their own rating, and the lowest rating in the chain is your limit. Keep the receiver tube clean and lightly lubricated, and use an anti-rattle device if your accessories shift in the opening.
Wiring, ball mounts and common pairings
A hitch is only part of a towing setup. You will also need a ball mount with the right rise or drop so the trailer sits level, a ball sized to the trailer coupler, and a hitch pin or locking pin. Safety chains cross under the tongue, and trailers over a certain weight need brakes and a brake controller, with requirements that vary by state.
- Choose a ball mount length that gives clearance between the trailer and the vehicle at tight turns.
- Use a wiring harness that matches your vehicle's connector, and test the lights before every trip.
- Grease the ball lightly and keep the coupler latch free of dirt.
Look over the receiver for rust and bent tubing after trail use, and replace any hitch that shows cracks or elongated bolt holes.
Popular Receiver Hitches brands
- Curt Manufacturing (67)
- DrawTite (47)
- B&W Hitch (16)
- Rugged Ridge (7)
- Smittybilt (4)
- Warn (3)
- Trimax Locks (2)
- Fab Fours (2)
- Crown Automotive (1)
- Rampage (1)
- Genuine Packages (1)
- RT Off-Road (1)
Receiver Hitches FAQ
What hitch class do I need?
Match the class to the trailer you plan to tow, then confirm it does not exceed your vehicle's rated towing capacity. Class III suits many SUVs and Jeeps, while heavier trailers call for a higher class on a capable vehicle.
Does a Class V hitch increase my towing capacity?
No. Towing capacity is set by the vehicle manufacturer and by the weakest component, including the frame, axle, brakes and hitch. A stronger hitch alone does not raise the vehicle's limit.
What is tongue weight?
Tongue weight is the downward force the trailer places on the hitch ball. For many conventional trailers it should fall near 10 to 15 percent of trailer weight, and it must stay within the hitch's rating.
Can I install a receiver hitch myself?
Many direct-fit hitches bolt to existing frame holes and can be installed at home with a helper and a torque wrench. If drilling, welding or trimming is involved, a professional installer is recommended.











