Overview
The DrawTite 76104 is a Class III max-frame receiver hitch for the 2007–2017 Jeep Wrangler (JK), available in 2 door and 4 door versions. It mounts at the rear, has a 2 inch square receiver tube, and is rated up to 4,500 lbs. gross trailer weight for both weight carrying and weight distributing use.
The hitch is built with solid all-welded construction for strength. The base has an A-Coat finish topped with black powder coat. It comes with a nationwide limited lifetime warranty. It does not fit right hand drive vehicles, so confirm the steering position before installing.
Key features
- 2 inch square receiver tube opening
- Rated up to 4,500 lbs. GTW for weight carrying and weight distributing
- Solid all-welded construction
- A-Coat base with black powder coat finish
- Rear mount for the JK Wrangler
- Does not fit right hand drive vehicles
- Nationwide limited lifetime warranty from DrawTite.
Steering position and fit
Right hand drive and left hand drive vehicles mount their steering on opposite sides, and a hitch that will not fit one side cannot be forced onto the other. Check the steering position on your vehicle before ordering. This quick check prevents a wasted purchase and a return.
A max-frame design sits in the frame rails, which keeps the load path tied into the vehicle structure. Frame condition matters, so look for rust, bent rails or damaged crossmembers before fitting any hitch. Solid welds and a clean powder coat help resist corrosion, but they do not replace a sound frame.
Towing with a Wrangler works best when the trailer is light and the loads are balanced. A rear receiver adds weight behind the axle and changes how the vehicle handles on turns and hills. Check bolts after the first few trips, and inspect the receiver for cracks.
Specifications
| Brand | DrawTite |
|---|---|
| Part number | 76104 |
| UPC | 16118039351 |
| Position | Rear |
| Receiver size | 2 inches x 2 inches |
| Weight class | Class III/IV |
| Rated weight | Up to 4,500 lbs. GTW (weight carrying and weight distributing) |
| Finish | A-Coat base with black powder coat |
| Fits with roll pan | N/A |
| Right hand drive | Not compatible |
| Fitment type | Direct fit |
Vehicle fitment
It is a direct fit for the 2007–2017 Jeep Wrangler (JK) in the 70th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport, Sport S and X trims, and in the Unlimited versions of those trims.
The fitment information ends at 2017, although the short copy refers to 07-Current Wrangler JK models, so 2018 is not confirmed. Wrangler JL models are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Confirm whether drilling is needed and plan for the install time before starting. Stay within the vehicle’s own towing limit, which may be lower than the 4,500 lbs. rating. Confirm the steering position first, because the hitch does not fit right hand drive vehicles.
What’s included
Check the package contents against your installation before starting, including hardware and any ball mount you need.












