Overview
The DrawTite 41015 is a Class III/IV Max-E-Loader trailer hitch for the 1991–1997 Toyota Land Cruiser and the 1996–1997 Lexus LX450, both in the Base trim. It mounts at the rear and has a 2 inch receiver. It is rated for 5000 lbs. gross trailer weight (GTW) and 500 lbs. tongue weight. With a weight distribution setup, it is rated for 6000 lb GTW and 750 lb tongue weight.
DrawTite builds this receiver hitch with all-welded construction, so it is built to fit the specific vehicle without adapters. It carries a nationwide lifetime warranty. Max-E-Loader is the product line, and 41015 is the part number to match when checking your vehicle.
Key features
- Max-E-Loader design for the rear of the vehicle
- 2 inch receiver opening
- Class III/IV weight class
- Rated 5000 lbs. gross trailer weight and 500 lbs. tongue weight
- Weight distribution ratings of 6000 lb GTW and 750 lb tongue weight
- All-welded construction
- Nationwide lifetime warranty stated by DrawTite
Older frames and mounting
Older body-on-frame trucks and SUVs carry towing loads through the frame, so the condition of that frame matters as much as the hitch. Surface rust, soft spots and previous repairs can all weaken a mounting area. Before fitting a receiver, look at the frame rails and crossmembers near the mounting points and clean them to bare metal where needed.
Clearance is another check. Exhaust pipes, fuel lines, spare tire carriers and the back of the body can sit close to a receiver, so confirm there is room for the ball mount and for the trailer to turn. Road clearance also changes when a loaded trailer is attached, so keep the trailer weight in check.
Use the correct tools and tighten the hardware to the torque called for in your repair procedure, since older bolts may be corroded and need replacement. After the first few trips, recheck fasteners and look for cracks or movement at the mounts. A hitch that shows movement should be taken off and inspected.
Specifications
| Brand | DrawTite |
|---|---|
| Part number | 41015 |
| UPC | 742512410150 |
| Position | Rear |
| Product line | Max-E-Loader |
| Weight class | Class III/IV |
| Receiver size | 2 inches x 2 inches |
| Gross trailer weight (GTW) | 5000 lbs. |
| Tongue weight | 500 lbs. |
| Weight distribution GTW | 6000 lb |
| Weight distributing tongue weight | 750 lb |
| Fits with roll pan | Does not fit with roll pan |
| Fitment type | Direct fit |
Vehicle fitment
It is a direct fit for the 1991–1997 Toyota Land Cruiser in the Base trim, and for the 1996–1997 Lexus LX450 in the Base trim.
Other Land Cruiser trims, Land Cruiser years outside 1991–1997, and LX450 years outside 1996–1997 are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Confirm the mounting method before starting the installation. For an older vehicle like these, check frame clearance and the condition of the mounting points before the hitch is loaded.
What’s included
Check the packaging before installing to confirm which hardware and any ball mount come with the hitch.














