Overview
The DrawTite 75078 is a Class III/IV Max-Frame rear trailer hitch for the 1996–2004 Toyota Tacoma. It is rated for 5000lbs. GTW and 500lbs. tongue weight, with weight distribution ratings of 5500lb and 550lb.
The hitch uses all welded construction with a 2 Inches X 2 Inches receiver opening. It is a direct fit with no adapters, needs no drilling, and installs in 40 min.
Key features
- Class III/IV rating for rear mount towing.
- Max-Frame design in the rear position.
- 5000lbs. GTW with a 5500lb weight distribution rating.
- 500lbs. tongue weight with a 550lb weight distribution tongue rating.
- 2 Inches X 2 Inches receiver size.
- All welded construction for strength.
- No drilling required.
- Does not fit with a roll pan.
Towing within the ratings
A Max-Frame rear hitch carries trailer loads through the frame, so the tongue weight rating matters as much as the total trailer weight. Tongue weight is the downward force the trailer places on the ball. Keep it within the rated figure, and remember that heavy cargo placed at the rear of a pickup bed adds to it.
Weight distribution equipment spreads the load across the axles, and its ratings apply only when the proper components are in place. Check the ball mount, the ball size and the trailer’s brakes and lights before each trip. Inspect the receiver tube and welds regularly for cracks or rust, especially after towing on rough roads.
- Check the hitch pin and clip before every trip
- Inspect welds and frame bolts after rough towing
- Confirm the loaded trailer stays within the rated limits
Specifications
| Brand | DrawTite |
|---|---|
| Part number | 75078 |
| UPC | 16118073218 |
| Position | Rear |
| Weight class | Class III/IV |
| Receiver size | 2 Inches X 2 Inches |
| Gross trailer weight (GTW) | 5000lbs. |
| Weight distribution rating (GTW) | 5500lb |
| Tongue weight | 500lbs. |
| Weight distribution rating (tongue) | 550lb |
| Drilling | No drilling required |
| Fitment type | Direct Fit |
| Install time | 40 min. |
Vehicle fitment
It fits the 1996–2004 Toyota Tacoma in Base, Limited, Pre Runner, S-Runner and SR5 trims. Tacoma models from later model years, and Toyota models other than the Tacoma, are not covered. Confirm your vehicle’s year, model and trim before ordering.
Tacoma models from later model years, and Toyota models other than the Tacoma, are not in this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Install time is 40 min. with no drilling required. Keep loads within the 500lbs. tongue weight and 5000lbs. GTW ratings, and check that the vehicle’s year and trim match the listed fitment before starting.
What’s included
Confirm which bolts, brackets and fasteners you need before starting the installation.














