Overview
The DrawTite 41551 is a Class III/IV round tube Max-E-Loader rear trailer hitch for the 2004–2011 Nissan Titan. It provides a 2 inch by 2 inch receiver for a trailer ball mount or other rear receiver accessories. It is rated for 6000 lbs gross trailer weight and 600 lbs tongue weight, with weight distributing ratings of 10000 lbs and 1000 lbs.
The hitch is built with all-welded construction and is designed to fit the 2004–2011 Nissan Titan without adapters. Every DrawTite hitch carries a nationwide lifetime warranty. Install time is 15 minutes.
Key features
- Class III/IV rating with a 6000 lbs GTW rating
- Weight distributing ratings of 10000 lbs GTW and 1000 lbs tongue
- Round tube Max-E-Loader design
- All-welded construction, built without adapters
- Nationwide lifetime warranty
- Install time listed at 15 minutes
Before you tow
A receiver hitch carries the load of the trailer tongue and passes it into the truck frame, so the mounting points and welds do most of the work. On a Titan, a Class III/IV receiver is a common choice for light utility trailers, small boats and cargo carriers. Before towing, check that the ball mount rise and drop suit the trailer, and that the ball is rated for the trailer’s weight.
Hitches are often replaced along with the trailer wiring and the ball mount, since those parts see the same loads. Inspect the receiver tube for cracks, bends or rust at the welds, and look at the bolts that fasten the hitch to the frame after the first few trips. Tighten any loose hardware and recheck after towing on rough roads.
Specifications
| Brand | DrawTite |
|---|---|
| Part number | 41551 |
| UPC | 742512415513 |
| Position | Rear |
| Weight class | Class III/IV |
| Receiver size | 2 inches x 2 inches |
| Gross trailer weight | 6000 lbs |
| Tongue weight | 600 lbs |
| Weight distributing rating | 10000 lbs GTW / 1000 lbs tongue |
| Construction | All-welded |
| Fitment type | Direct fit |
| Fits with roll pan | No, does not fit with a roll pan |
| Install time | 15 min |
Vehicle fitment
The hitch fits the 2004–2011 Nissan Titan in the LE, PRO-4X, S, SE, SL, SV and XE trims. Other Nissan models and Titan model years outside 2004–2011 are not covered. Confirm your vehicle’s year, model and trim before ordering.
Other Nissan models and Titan model years outside 2004–2011 are not in this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the hitch is built for the specific vehicle with no adapters, compare the parts with your Titan’s mounting points before starting. Install time is 15 minutes. Support the truck on jack stands rather than a jack alone.
What’s included
Compare the hardware you received with the installation steps before starting.
Not included: trailer ball, ball mount, and wiring harness would need separate parts.














