Overview
The DrawTite 75054 is a rear Class III/IV max-frame trailer hitch with a 2 inch square receiver tube opening, for the 1984 to 2001 Jeep Cherokee XJ and the 1984 to 1990 Jeep Wagoneer SJ. It attaches at all frame attachment points and is custom built for each vehicle application.
The hitch is solid, all-welded construction with no adapters. Every DrawTite hitch carries a nationwide lifetime warranty. Installation requires drilling.
Key features
- Black powder coat finish
- Class III/IV rating with a 2 inch square receiver tube opening
- Connects at all frame attachment points
- Rated up to 3,500 lbs. GTW weight carrying and 5,500 lbs. GTW weight distributing
- Solid, all-welded construction
- Custom built per vehicle application
Max-frame installs on older Jeeps
Max-frame hitches attach at the frame of older Jeeps, so the condition of the frame rails decides how much the setup can safely carry. Before drilling, check for rust, flaking metal and cracks near the planned attachment points, and mark the holes carefully to match the frame. Frame condition matters more than the rating on a vehicle that has been driven in wet or salty areas.
Because this hitch is custom built for each application, the fit is tied to the vehicle it was ordered for, so confirm the year, model and trim before ordering. Weight distributing use requires matching spring bars and brackets, and the vehicle’s own towing and payload limits still apply. Plan drilling and bolt tightening for a dry, level workspace, and recheck the fasteners after the first few trips.
- Inspect frame rails before drilling
- Mark hole locations carefully
- Use matched spring bars for weight distribution
- Recheck fasteners after the first trips
Specifications
| Brand | DrawTite |
|---|---|
| Part number | 75054 |
| UPC | 742512750546 |
| Position | Rear |
| Weight class | Class III/IV |
| Receiver size | 2 inches x 2 inches |
| Finish | Black powder coat |
| Weight carrying rating | Up to 3,500 lbs. GTW |
| Weight distributing rating | Up to 5,500 lbs. GTW |
| Roll pan compatibility | Does not fit with roll pan |
| Fitment | Direct fit |
Vehicle fitment
The manufacturer fitment list covers 1984 to 2001 Jeep Cherokee (XJ) with Base, Briarwood, Chief, Classic, Country, Laredo, Limited, Pioneer, SE and Sport trims, and 1984 to 1990 Jeep Wagoneer (SJ) with Base and Limited trims.
The list does not cover the Grand Cherokee, Liberty or other Jeep models, or Cherokee years outside 1984 to 2001. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Drilling is required, and the hitch is custom built per vehicle application, so the frame points must match your specific vehicle before you start.
What’s included
Confirm you have the bolts and brackets your frame points need before starting.
Not included: a hitch ball, ball mount and hitch pin for the 2 inch receiver.














