Overview
The DrawTite 75282 is a Class III/IV rear max-frame trailer hitch for the 2005–2012 Nissan Frontier and the 2009–2011 Suzuki Equator. It carries a 2 inch by 2 inch receiver with a 5000 lb gross trailer weight rating and an 8000 lb weight distributing rating.
The hitch installs without drilling, with an install time of 30 minutes. The fitment covers specific trims for both trucks, so check that your trim matches before ordering.
Key features
- Class III/IV rear hitch with 5000 lb GTW and 500 lb tongue weight
- Weight distributing rating of 8000 lb trailer weight and 800 lb tongue weight
- 2 inch by 2 inch receiver opening
- Max-frame design, with DrawTite noting all-welded construction and no adapters
- No drilling required, with an install time of 30 minutes
- Each hitch is covered by a nationwide lifetime warranty from DrawTite.
Max-frame care on pickups
Max-frame hitches bolt to the frame behind the bumper, so the frame condition around each mounting point determines how safely the receiver carries load. Look for rust, cracks or bent metal around the attachment points, particularly on trucks that have seen salt or off-road use. Surface rust can be cleaned and treated, but cracked metal means the frame needs repair before a hitch goes on.
Pickup rear bumpers and tire carriers add weight to the back of the truck, which changes how the trailer tongue load feels on the rear axle. Heavier accessories also shift handling, so recheck the trailer load after adding them. Brake controllers and sway control bars are often a good match for a heavy trailer, and they are commonly replaced alongside the hitch.
- Check bolt tightness after the first few trips
- Inspect frame mounting points for rust
- Confirm ball size matches the trailer coupler
- Keep bumper and spare loads balanced side to side
Specifications
| Brand | DrawTite |
|---|---|
| Part number | 75282 |
| UPC | 742512752823 |
| Hitch class | Class III/IV |
| Receiver size | 2 inch x 2 inch |
| Position | Rear |
| Gross trailer weight (GTW) | 5000 lb |
| Tongue weight | 500 lb |
| Weight distributing trailer weight | 8000 lb |
| Weight distributing tongue weight | 800 lb |
| Roll pan compatibility | Does not fit with roll pan |
| Install time | 30 min |
| Drilling | No drilling required |
Vehicle fitment
It fits the 2005–2012 Nissan Frontier in LE, Nismo Off-Road, PRO-4X, S, SE, SL, SV and XE trims, and the 2009–2011 Suzuki Equator in Base, Premium, RMZ-4 and Sport trims.
Nissan Frontier years after 2012 and Suzuki Equator years outside 2009–2011 are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
DrawTite lists no drilling and a 30 minute install. Support the truck safely while you install the hitch.
What’s included
Confirm which fasteners you have before starting the installation.














