Overview
The DrawTite Class III/IV Max-E-Loader trailer hitch, part number 41536, is a rear receiver hitch with a 2-inch receiver. It is rated 6000lbs. GTW and 600lbs. tongue weight for weight carrying, and 10000lbs. GTW and 1000lbs. tongue weight for weight distributing.
DrawTite describes its hitches as all welded and built for each vehicle application, with no adapters. This model does not fit with a roll pan and carries a stated install time of 15 min.
Key features
- Rear mounted 2-inch receiver
- Class III/IV weight class
- Weight carrying and weight distributing ratings
- Built with all welded construction.
- Install time of 15 min
Before you tow
A Class III/IV receiver is meant for trailers and loads within its weight ratings. Weight carrying and weight distributing ratings are different, so choose the rating that matches your trailer setup and tongue weight. A weight distributing setup moves part of the trailer load across the axles and must be paired with the correct equipment.
Inspect the welds, receiver tube and mounting bolts before each towing season and after any hard impact. Look for cracks, flaking rust or bolts that have loosened. A hitch that has been struck or overloaded should be replaced rather than repaired.
- Keep the receiver clear of mud and road grit
- Retighten mounting bolts after the first few trips
- Use a hitch cover to slow rust in wet climates
Specifications
| Brand | DrawTite |
|---|---|
| Part number | 41536 |
| UPC | 74251241536 |
| Product line | Max-E-Loader |
| Mounting position | Rear |
| Receiver size | 2 in |
| Weight class | Class III/IV |
| Weight carrying | 6000lbs. GTW / 600lbs. tongue weight |
| Weight distributing | 10000lb. GTW / 1000lb. tongue weight |
| Roll pan fit | Does not fit with roll pan |
| Install time | 15 min |
Vehicle fitment
No vehicle years, makes or models are named for this hitch. DrawTite builds each hitch for a particular application, so ask the manufacturer about your vehicle before selecting one.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The install time is 15 min. Gather the parts and tools your installation needs before starting, and confirm the hardware suits your vehicle.
What’s included
No hardware or accessories are named with this hitch, so confirm the package contents with DrawTite.














