Overview
The DrawTite 75758 is a Class III/IV round tube max-frame trailer hitch for the 2013 Ford Escape in the S, SE, SEL and Titanium trims. It mounts at the rear and has a 2 inch receiver. It is rated for 3500 lb gross trailer weight (GTW) and 525 lb tongue weight, and it also carries ratings for weight distribution setups.
The max-frame design suits crossovers that need a receiver without a large frame modification. The hitch is all-welded, built to fit the specific vehicle with no adapters, and carries a nationwide lifetime warranty. No drilling is required, and the install time is 15 minutes.
Key features
- Round tube max-frame design, rear mount
- 2 inch receiver for hitch accessories
- Class III/IV weight class
- No drill required for installation
- 15 minute install time
- Weight distribution ratings listed alongside standard ratings
- Nationwide lifetime warranty stated by DrawTite
Crossover towing basics
Crossovers like the Escape are built on car-based platforms, so their towing limits are usually modest compared with body-on-frame trucks. A max-frame hitch helps spread load into the vehicle structure, but the real limit is set by the vehicle, its cooling and its brakes. Light trailers, bike racks and small cargo carriers are the typical loads for this class of hitch.
Weight distribution is a separate consideration. Spring bars and sway control only work correctly when the tongue weight and hitch rating are matched, so a standard tow setup should not borrow the weight distribution figures. Recheck the connection and trailer lights after the first few miles, since a loose ball mount or wiring harness is easy to overlook.
- Keep trailer loaded weight below the lower rating
- Check trailer lights before each trip
- Tighten the ball mount nut after the first tow
Specifications
| Brand | DrawTite |
|---|---|
| Part number | 75758 |
| UPC | 742512757583 |
| Position | Rear |
| Frame style | Round tube max-frame |
| Receiver size | 2 inches x 2 inches |
| Weight class | Class III/IV |
| Gross trailer weight (GTW) | 3500 lb |
| Tongue weight | 525 lb |
| Weight distributing tongue weight | 400 lb |
| Weight distribution GTW | 4000 lb |
| Install time | 15 minutes |
| Fits with roll pan | Does not fit with roll pan |
Vehicle fitment
The fitment covers the 2013 Ford Escape in the S, SE, SEL and Titanium trims.
Other Escape model years, and Escape trims not named in the list, are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The hitch is a bolt-on rear unit that needs no drilling, with an install time of 15 minutes. The weight distributing figures apply only to a weight distribution setup, so do not use them for a standard tow. Stay within the Escape’s own towing capacity, which is separate from the hitch rating.
What’s included
Hardware and a ball mount are not included with the 75758, so check the packaging before installing.









