Overview
The DrawTite 65005 is a front mount receiver hitch, a 2 x 2 inch front receiver for 1988 to 2000 Chevrolet and GMC C/K pickups, Suburbans, Blazers, Tahoes, Yukons and Jimmys. DrawTite builds its receiver hitches with all welded construction and says they are made to fit a specific vehicle without adapters, for maximum strength.
The hitch mounts at the front of the vehicle and is a direct fit. Every hitch in the DrawTite line carries a nationwide lifetime warranty.
Key features
- All welded construction
- Direct fit design with no adapters
- Front mount position with a 2 x 2 inch receiver
- 500 lbs tongue weight rating
- 9000 lbs maximum gross trailer weight
- Does not fit with a roll pan
- Install time listed at 40 min
- Backed by a nationwide lifetime warranty from DrawTite
Front-mount basics
Front receivers give a square socket at the front of the frame for accessories such as winch carriers, light bars and bike racks. Because the load sits ahead of the axle, a front receiver is not a substitute for a rear trailer hitch, and it should not be used to tow. Keep accessory weight modest and balanced from side to side.
Front-mounted accessories change how the front end handles, so check steering, brake feel and headlight aim after installing. Inspect the frame area around the receiver for rust or cracked welds at each oil change, and tighten all fasteners after the first few trail runs. Remove the accessory when it is not in use to reduce strain on the mount.
Ball mounts and tow accessories are sized to the receiver opening, so the 2 inch receiver size should match the pin and mount you choose. Vibration loosens fasteners on older trucks, so recheck bolts often.
Specifications
| Brand | DrawTite |
|---|---|
| Part number | 65005 |
| UPC | 58914657049 |
| Position | Front |
| Fitment type | Direct fit |
| Receiver size | 2 inches x 2 inches |
| Tongue weight | 500 lbs |
| Maximum gross trailer weight | 9000 lbs |
| Roll pan compatibility | Does not fit with roll pan |
| Weight class | Not rated |
| Install time | 40 min |
Vehicle fitment
The 65005 is for 1988 to 2000 Chevrolet and GMC C/K trucks. Covered models include the Chevrolet C1500, C2500, C3500, K1500 Suburban, K2500, K3500 and R-series trucks, the GMC C1500, C2500, C3500, K2500, K3500 and R3500, plus Suburban, Blazer, S10 Blazer, Tahoe, Jimmy and Yukon entries from 1988 to 2000 depending on model. The 1999 and 2000 C1500 trucks, K1500 pickups other than the Suburban, and any model year after 2000 are not covered. Confirm your vehicle’s year, model and trim before ordering.
The list does not include 1999 and 2000 C1500 trucks, K1500 pickups other than the Suburban, or any model year after 2000. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Installation takes 40 minutes. Check the hardware against the instructions before starting, and keep the vehicle secure on level ground while you work.
What’s included
Check which parts you have against your installation plan before starting.














