Receiver Hitches
Showing 49–60 of 151 resultsSorted by popularity
-
-
Receiver Hitches
Curt Manufacturing Class III 2″ Receiver Hitch – 13831
- Fits 2000–2004 Nissan Frontier in SC, SE, SVE and XE trims
- Round tubular Class III receiver hitch
- No-drill installation
- Designed for towing above 4,000 pounds and below 10,000 pounds gross trailer weight
- Part number CRT13831, gloss black powder coat
SKU: CRT13831 -
Receiver Hitches
Curt Manufacturing Class III 2″ Receiver Hitch – 13591
- Fits Chevrolet Equinox 2005–2017, GMC Terrain 2010–2017, Pontiac Torrent 2006–2009 and Saturn Vue 2002–2007
- Class III rear receiver hitch with no-drill installation
- Rated 3500lbs gross trailer weight and 350lbs tongue weight
- Weight distributing rating of 4000lbs with 400 lbs weight distributing tongue weight
- Part number CRT13591, gloss black powder coat
SKU: CRT13591 -
Receiver Hitches
Curt Manufacturing Class III 2″ Receiver Hitch – 13534
- Fits 2008–2013 Toyota Highlander in Base, Hybrid, Hybrid Limited, Limited, Plus, SE and Sport trims
- Class III round tubular receiver hitch
- No-drill installation
- Designed for towing above 4,000 pounds and below 10,000 pounds gross trailer weight
- Part number CRT13534, gloss black powder coat
SKU: CRT13534 -
Receiver Hitches
Curt Manufacturing Class III 2″ Receiver Hitch – 13530
- Fits 2004–2006 Lexus RX330 (Base), 2007–2009 Lexus RX350 (Base) and 2006–2008 Lexus RX400h (Base)
- Fits 2004–2007 Toyota Highlander in Base, Hybrid, Hybrid Limited, Limited and Sport trims
- Class III round tubular receiver hitch with no-drill installation
- Designed for towing above 4,000 pounds and below 10,000 pounds gross trailer weight
- Part number CRT13530, gloss black powder coat
SKU: CRT13530 -
Receiver Hitches
Curt Manufacturing Class III 2″ Receiver Hitch – 13460
- Fits 2020–2021 Toyota Highlander, listed by Curt Manufacturing as a direct-fit custom hitch
- Class III/IV rear receiver hitch with a 2 inches x 2 inches receiver size
- Rated for 6,000 lbs gross trailer weight and 900 lbs tongue weight
- Weight distribution compatible, rated 8,000 lbs WD and 900 lbs WDTW
- Black powder coat over an A-coat rust prevention dip, with a limited lifetime warranty
SKU: CRT13460 -
Receiver Hitches
Curt Manufacturing Class III 2″ Receiver Hitch – 13419
- Fits the 2019 Ram 1500 in Big Horn, Laramie, Laramie Longhorn, Limited, Lone Star, Rebel and Tradesman trims
- Rated to 6,000 lbs gross trailer weight and 600 lbs tongue weight
- Class III/IV rear receiver hitch with an open-back receiver
- Includes installation hardware; Curt Manufacturing part number CRT13419
SKU: CRT13419 -
Receiver Hitches
Curt Manufacturing Class III 2″ Receiver Hitch – 13401
- Round tubular Curt Class III/IV receiver hitch, part number CRT13401
- Fits 1973-1974 and 1987-1991 Chevrolet Blazer, 1975-1986 K5 Blazer and 1973-1991 GMC Jimmy
- No-drill installation, 2 inch by 2 inch receiver
- Does not fit with a roll pan
SKU: CRT13401 -
Receiver Hitches
Curt Manufacturing Class III 2″ Receiver Hitch – 13396
- Curt Manufacturing CRT13396 Class III rear receiver hitch with a 2 Inches X 2 Inches receiver.
- Direct fit for the 2017–2018 Land Rover Discovery in the HSE, HSE Luxury and SE trims.
- Weight class Class III/IV, rear mounting position.
SKU: CRT13396 -
Receiver Hitches
Curt Manufacturing Class III 2″ Receiver Hitch – 13394
- Curt Manufacturing CRT13394 Class III rear receiver hitch with a 2 Inches X 2 Inches receiver.
- Direct fit for the 2018–2019 Lexus RX350L (Base) and the 2014–2019 Toyota Highlander in the listed trims.
- Weight class Class III/IV; does not fit with a roll pan.
- Suited to boat trailers, popup campers, ATV trailers and utility trailers.
SKU: CRT13394 -
Receiver Hitches
Curt Manufacturing Class III 2″ Receiver Hitch – 13392
- Curt Class III hitch, part number CRT13392, for the 2018 Jeep Wrangler JL
- Rated 3,500 lbs gross trailer weight and 350 lbs tongue weight
- Compatible with a weight distribution hitch rated 4,000 lbs WD / 400 lbs WDTW
- Includes installation hardware; exhaust must be temporarily lowered
SKU: CRT13392 -
Understanding hitch classes
Hitches are grouped by class according to their rated gross trailer weight and tongue weight. Class III hitches are common on SUVs, half-ton trucks and Jeeps, while Class IV and V hitches are built for heavier trailers and larger trucks. Receivers are normally 1.25 inch or 2 inch square, and Class III and above generally use 2 inch. A higher class does not raise your vehicle's tow rating, because the lowest-rated component in the whole system sets the limit.
Specifications to check
- Gross trailer weight (GTW): The maximum total trailer weight the hitch is rated for.
- Tongue weight (TW): The downward force on the ball, typically around 10 to 15 percent of trailer weight for conventional trailers.
- Receiver size: Confirm it matches your ball mount, bike rack or accessory shank.
- Weight-distributing rating: Some hitches carry different ratings with and without a weight-distribution system.
- Mount location: Rear hitches are standard, while front receivers are sold as separate designs.
Fitment and compatibility
Direct-fit hitches are made for a particular chassis, with bolt holes that line up with factory frame points. Bumper cutouts, exhaust routing, spare tire carriers and roll pans can interfere, and some listings note whether the hitch fits with a roll pan. Always confirm fitment for your exact year, make and model, and check the manufacturer's specifications and your owner's manual for the vehicle's tow rating.
Installation notes
Most bolt-on hitches install with basic hand tools and a helper, but they carry a lot of load, so fastener quality and torque matter. Use the supplied hardware, tighten to the specified torque, and recheck after the first drive. Clean and treat any weld seams or drilled areas against rust. Wiring for trailer lights is a separate harness. If you are unsure about any step, have the hitch installed by a professional, and inspect it periodically for cracks, loose bolts and corrosion.
Check the fine print when you pair a hitch with accessories. A ball mount, pin, coupler and chains each carry their own rating, and the lowest rating in the chain is your limit. Keep the receiver tube clean and lightly lubricated, and use an anti-rattle device if your accessories shift in the opening.
Wiring, ball mounts and common pairings
A hitch is only part of a towing setup. You will also need a ball mount with the right rise or drop so the trailer sits level, a ball sized to the trailer coupler, and a hitch pin or locking pin. Safety chains cross under the tongue, and trailers over a certain weight need brakes and a brake controller, with requirements that vary by state.
- Choose a ball mount length that gives clearance between the trailer and the vehicle at tight turns.
- Use a wiring harness that matches your vehicle's connector, and test the lights before every trip.
- Grease the ball lightly and keep the coupler latch free of dirt.
Look over the receiver for rust and bent tubing after trail use, and replace any hitch that shows cracks or elongated bolt holes.
Popular Receiver Hitches brands
- Curt Manufacturing (67)
- DrawTite (47)
- B&W Hitch (16)
- Rugged Ridge (7)
- Smittybilt (4)
- Warn (3)
- Trimax Locks (2)
- Fab Fours (2)
- Crown Automotive (1)
- Rampage (1)
- Genuine Packages (1)
- RT Off-Road (1)
Receiver Hitches FAQ
What hitch class do I need?
Match the class to the trailer you plan to tow, then confirm it does not exceed your vehicle's rated towing capacity. Class III suits many SUVs and Jeeps, while heavier trailers call for a higher class on a capable vehicle.
Does a Class V hitch increase my towing capacity?
No. Towing capacity is set by the vehicle manufacturer and by the weakest component, including the frame, axle, brakes and hitch. A stronger hitch alone does not raise the vehicle's limit.
What is tongue weight?
Tongue weight is the downward force the trailer places on the hitch ball. For many conventional trailers it should fall near 10 to 15 percent of trailer weight, and it must stay within the hitch's rating.
Can I install a receiver hitch myself?
Many direct-fit hitches bolt to existing frame holes and can be installed at home with a helper and a torque wrench. If drilling, welding or trimming is involved, a professional installer is recommended.











