Overview
The Crown Automotive 52060290K is a rear trailer hitch with a 2 inch receiver for the 2007–2018 Jeep Wrangler (JK), including the Rubicon, Sahara, Sport and anniversary trims. It is a Class II receiver hitch rated for a 3500 lb towing capacity and a 350 lb tongue weight, and it comes with grade 8 bolts and washers. A receiver hitch is the mounting point for a ball mount, cargo carrier or other hitch accessory.
No drilling is required, so this is a bolt-on receiver that avoids modifying the frame. It fits both the standard and Unlimited versions of the JK Wrangler, in the trims named in the fitment section below.
Key features
- 2 inch receiver opening for hitch accessories
- Rated for a 3500 lb towing capacity
- 350 lb tongue weight
- Class II weight class
- No drilling required
- Grade 8 bolts and washers included
- Rear position, does not fit with a roll pan
Towing with a JK Wrangler
A Wrangler JK is a light vehicle with a body-on-frame design, so a receiver hitch is a practical way to carry a bike rack, cargo carrier or small utility trailer. Think of the receiver as the attachment point, not the limit. The load a trailer puts on the hitch and the vehicle’s towing capacity together set how much can be pulled safely.
When choosing accessories, match the ball mount to the receiver opening and the trailer’s coupler. Light loads on a bike rack or carrier add weight at the rear, which affects steering and braking, so take slower turns and allow more stopping distance. Recheck the hardware after the first few trips, since new bolts can settle under load.
Check the hitch regularly. Look for loose bolts, rust at the mounting points and any sign that the receiver has shifted. Keep the receiver opening clean and free of grit when nothing is attached. A worn or damaged hitch should be replaced rather than repaired at the tube.
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | 52060290K |
| UPC | 848399081589 |
| Position | Rear |
| Receiver size | 2 inches x 2 inches |
| Weight class | Class II |
| Towing capacity | 3500 lb |
| Tongue weight | 350 lb |
| Hardware | Grade 8 bolts and washers |
| Installation | No drilling required |
| Fits with roll pan | Does not fit with roll pan |
Vehicle fitment
It fits the 2007–2018 Jeep Wrangler (JK) in the 70th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport and Sport S trims, and the Unlimited 70th Anniversary, Unlimited 75th Anniversary, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport, Unlimited Sport S and Unlimited X versions, plus the base X trim.
Wrangler JL (JL and JLU) models and older Wrangler TJ, LJ and YJ models are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the hardware is grade 8, use the bolts supplied with the hitch rather than substitutes. The hitch does not fit with a roll pan, so check any bumper accessories before installing. Stay within the vehicle’s own towing limits, which may be lower than the 3500 lb capacity printed for the hitch.
What’s included
The hitch comes with grade 8 bolts and washers.
Not included: A ball mount and hitch pin are not included and must be sourced separately to tow with this receiver.









