Leveling kit vs lift kit explained: factory rake, spacers and torsion keys, tire sizes at 2 to 3 inches, CV angles, towing, load leveling…
Lift Kits
Showing 169–180 of 1736 resultsSorted by popularity
-
-
Lift Kits
Rough Country 5″ GM Torsion Bar Drop Suspension Lift Kit – 10330
- 5-inch torsion drop lift for 2011–2019 Silverado and Sierra HD 2500 and 3500
- 1/4-inch steel crossmembers and torsion bar drop brackets
- N3 shocks with 10-stage valving
- Requires minor cutting and drilling
- Not for dually models or Magnetic Ride Control
SKU: R/C10330 -
Lift Kits
Rough Country 5″ GM Suspension Lift Kit with N3 Front Lift Struts – 28101
- 5-inch GM lift kit with N3 front lift struts for Tahoe, Suburban and Yukon
- Lifted coil springs and lifted knuckles
- Sway-bar drop brackets and differential drop brackets
- Minor cutting and drilling required, with 18-inch or larger wheels
SKU: R/C28101 -
-
Lift Kits
Rough Country 5″ GM NTD Suspension Lift Kit with Vertex Reservoir Shocks – 10250
- 5-to-7-inch GM non-torsion drop lift for 2020–2026 2500 HD trucks
- Front and rear crossmembers laser cut from US steel
- N3 shocks, lifted knuckles and a differential skid plate
- Clearance for up to 37-inch tires
- Does not fit dually or Magnetic Ride Control models
SKU: R/C10250 -
Lift Kits
Rough Country 5″ Dodge Suspension Lift Kit with N3 Shocks – 381.20
- 5-inch Dodge Ram 1500 suspension lift with N3 shocks at the front and rear
- Block and u-bolt rear lift
- Recommended tire size 35×12.50
- Recommended wheel backspacing of 5.5 inches
- Fits 2002–2005 Ram 1500 Laramie, SLT and ST
SKU: R/C381.20 -
-
Lift Kits
Rough Country 4-5″ Toyota Suspension Lift Kit with Lift Blocks and N3 Shocks – 734.20
- 4-to-5-inch lift for the 1989–1995 Toyota pickup with IFS front suspension
- Lowered front lower control arms with lifted cast knuckles
- Recommended tire size 33×12.50 with 3.75-inch wheel backspacing
- Does not fit 1996 Tacoma or extended cab models
SKU: R/C734.20 -
Lift Kits
Rough Country 4.75″ GM Body/Suspension Combo Lift Kit with N3 Shocks and Forged Upper Control Arms – 294.20
Lift KitsRough Country 4.75″ GM Body/Suspension Combo Lift Kit with N3 Shocks and Forged Upper Control Arms – 294.20
- Rough Country 4.75 inch GM body and suspension combo lift with N3 shocks, part number 294.20
- 1.25 inch body lift combined with a 3.5 inch suspension lift
- MOOG ball joints with sealed boot and grease-relief valve
- Fits 2014–2015 Silverado 1500 and Sierra 1500 in select trims
SKU: R/C294.20 -
Lift Kits
Rough Country 4″ Toyota Suspension Lift Kit with V2 Monotube Shocks – 75170
- 4-inch Toyota Tundra suspension lift for 2016–2021 models
- Lifted knuckles, skid plate and high-clearance front crossmember
- V2 monotube rear shocks and reused factory front shocks listed
- Block and u-bolt rear lift
SKU: R/C75170 -
Lift Kits
Rough Country 4″ Ram Suspension Lift Kit with N3 Shocks – 348.23
- 5-inch Ram suspension lift with N3 shocks and block and u-bolt rear lift
- Control arm drop bracket system for the Ram 2500
- Velocity-sensitive 10-stage valving on the N3 shocks
- Fits 2011–2013 Ram 2500 and 2011–2012 Ram 3500
SKU: R/C348.23 -
Lift Kits
Rough Country 4″ Long Arm Suspension Lift Kit with N3 Shocks – 61930
- 4-inch long arm suspension lift for four-door Jeep Wrangler JL Unlimited
- Four-link setup with adjustable upper and lower control arms
- Dual-rate coils and N3 shocks
- No welding or removal of the factory crossmember required
- Fits 2018–2026 Wrangler JL Unlimited four-door models
SKU: R/C61930
What a lift kit includes
A lift kit is a bundle of parts that raises the body or frame relative to the axles. Listings in this category show how much the contents vary. Some kits are little more than spacers and bump stops, while others add replacement coil springs, extended sway bar links, track bar brackets, steering drop components and matched shocks.
Lift height is the headline number, but it is only part of the story. A kit sold as 3.5 inch, 4 inch or 6 inch describes nominal lift, and the actual change depends on the vehicle, tire size and how much it sags with weight.
Short arm, long arm and spacer designs
Design matters more than height. Common types you will see here:
- Spacer and strut kits raise the ride height cheaply and keep factory geometry, which suits moderate lifts.
- Short arm kits keep the factory control arm mounting points and replace springs, arms and shocks. They are simple to install and work well for daily drivers.
- Long arm and 4-link kits relocate the arm mounts with crossmembers, giving better articulation and a flatter arm angle at the cost of more complex installation.
- Radius arm and drop bracket kits are common on solid-axle trucks and corrected geometry varies by model.
Kits with a stage or number in the name usually add components step by step, so read the contents list rather than assuming two kits of the same height are equivalent.
Shocks and geometry correction
Raising a vehicle changes control arm angles, driveline angles and steering geometry. Good kits include correction parts such as caster-correcting bushings, cam bolts for pinion angle, drop brackets, a high steer or drag link, and extended brake lines. If a kit leaves these out, plan to buy them separately.
Shocks are either included or sold separately. Twin tube, monotube and reservoir shocks differ in heat handling and ride feel. Confirm the shock lengths suit the lift height, since a shock that is too short can limit travel and one that is too long can bottom the bump stops.
Installation and compatibility
Lift kits are vehicle specific. Confirm fitment for your exact year, make, model, cab or door configuration, drivetrain (2WD or 4WD) and engine, then compare against the manufacturer's specifications. Part numbers often change between model years.
Suspension, steering and brake line work is safety critical. Professional installation is a sound choice unless you have the tools and experience, and every fastener should be tightened to the specified torque with the vehicle at ride height. Plan on an alignment after the lift, plus a check of headlight aim, speedometer calibration if you change tire size, and driveshaft angles.
Lift height, bumper height and tire rules vary by state, so check local regulations.
Maintenance and common mistakes
A lifted suspension needs more attention than a stock one. Recheck every suspension bolt after the first 100 miles or so, because bushings settle and fasteners can lose torque. Grease any fittings on control arms and ball joints on the schedule the manufacturer gives, and inspect bump stops, shock mounts and brake lines at each oil change.
- Do not pick a lift height first and shop for parts second. Start with the tire size you want and the use you have in mind.
- Do not skip extended brake lines or a driveshaft check on taller lifts.
- Do not mix leftover parts from different kits, since spring rates and arm lengths are matched within a kit.
- Remember that a taller vehicle behaves differently in corners and in emergency maneuvers, so adjust your driving.
Related guides
- Leveling Kit vs Lift Kit: What 3 Inches Really Gets You
- The XJ Cherokee 4.5-Inch Lift: What a Complete Kit Needs
A complete XJ 4.5 lift needs coils, leaf springs, control arms, a track bar, shocks and brake lines. See the parts, axle limits and…
- Jeep JK Lift Heights: 2.5 vs 3.5 vs 4.5 Inch Compared
Jeep JK lift heights compared: the tires 2.5, 3.5 and 4.5-inch lifts clear, the track bars, arms, lines and driveshafts each needs, and which…
- Twin-Tube, Monotube or Reservoir: Picking the Right Shock
Twin-tube, monotube and reservoir shocks compared: how each handles heat, how to size one for your lift, and which design fits how you drive.
- Bilstein 5100 vs Fox 2.0 Performance: Which Shock for Your Lifted Truck or Jeep
Bilstein 5100 vs Fox 2.0 Performance: body, shaft, reservoir, travel and lift ratings across 417 part numbers, which trucks and Jeeps both fit, how…
Popular Lift Kits brands
- Pro Comp Suspension (613)
- Rubicon Express (338)
- Fabtech (162)
- Rough Country (98)
- Tuff Country (90)
- Skyjacker (80)
- TeraFlex (64)
- Daystar (62)
- ReadyLift (59)
- Trail Master (40)
- Genuine Packages (26)
- ARB 4x4 Accessories (24)
Lift Kits FAQ
How much lift do I need for 35 inch tires?
It depends on the vehicle, backspacing and trimming. Many solid-axle vehicles clear 35s with about 3.5 to 4 inches of lift plus some trimming, while independent front suspension trucks vary. Check the kit manufacturer's tire size guidance for your exact model.
Do I need an alignment after installing a lift kit?
Yes. Changing ride height alters caster, camber and toe, so an alignment is required after installation. Headlight aim and driveline angles should also be checked, and a high steer or geometry correction parts may be needed.
Is a long arm kit better than a short arm kit?
Long arm kits generally improve articulation and geometry at taller lifts but cost more and are harder to install. Short arm kits are simpler and fine for moderate lifts and mostly street use.
Will a lift kit affect my ride and fuel economy?
Usually yes. A taller, heavier setup raises the center of gravity and increases drag, and bigger tires add weight and rolling resistance. Quality shocks and correct alignment help the ride but cannot fully offset those changes.















