Overview
The Rough Country Ram suspension lift kit with N3 shocks, part number R/C348.23, fits the 2011–2013 Ram 2500 and the 2011–2012 Ram 3500 in the Big Horn, Laramie, Laramie Longhorn, Lone Star, Outdoorsman, SLT, ST and Tradesman versions. It provides a lift height range of 4 to 5.5 inches.
N3 shocks are fitted at the front and rear. They use velocity-sensitive valving and 10-stage variable valving, tuned to the weight of the truck, and need no further adjustment.
A Control Arm Drop Bracket System is included for the Dodge 2500. Its drop brackets lower the stock control arms to a reduced mounting angle, which avoids the steep angle common on 5-inch and larger kits.
Key features
- Control Arm Drop Bracket System that reduces the stock arm mounting angle
- N3 shocks at the front and rear
- 10-stage variable valving with velocity-sensitive technology
- Block and u-bolt rear lift
- Listed lift height range of 4 to 5.5 inches
- Direct fit for the listed Ram models
Drop brackets and alignment
Control arm drop brackets move the stock arms to a new mounting point, which changes caster, camber and the way the front end steers. That is why the alignment is set after the arms are moved, and why the driveline angles need a look after the lift goes in. Most of the work happens at the front, but the rear angles still matter.
Shock matching matters on a heavy-duty truck because the weight carried changes how the suspension responds over bumps. Valving tuned to the truck keeps the ride steady, but the shocks still wear. Look for fluid leaks, uneven tire wear and a bouncy ride as signs they need attention.
- Recheck caster after drop bracket installation
- Inspect control arm bushings at each service
- Replace shocks in pairs when one end wears
Specifications
| Brand | Rough Country |
|---|---|
| Part number | R/C348.23 |
| Lift kit | 3.5 to 4 inches |
| Shock series | N3 |
| Front shocks | N3 |
| Rear shocks | N3 |
| Valving | 10-stage variable |
| Rear lift component | Block and u-bolt |
| Lift height range | 4 to 5.5 inches |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 2011–2013 Ram 2500 and the 2011–2012 Ram 3500.
Ram 1500 models and other years of the 2500 and 3500 are not on the list.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Drop brackets change the control arm mounting angle, so the alignment should be checked after the arms are moved. Confirm the driveline angles after the lift is installed.
What’s included
N3 front and rear shocks, the Control Arm Drop Bracket System, and the block and u-bolt rear lift components.










