Overview
The Rough Country 5-inch Dodge suspension lift kit with N3 shocks, part number R/C381.20, fits the 2002–2005 Dodge Ram 1500 in the Laramie, SLT and ST versions. It uses N3 shocks at the front and rear, with a block and u-bolt rear lift.
The lift height range is 4 to 5.5 inches. Recommended tires are 35×12.50, with a recommended wheel backspacing of 5.5 inches.
Key features
- N3 shocks at the front and rear
- Block and u-bolt rear lift
- Recommended tire size 35×12.50
- Recommended wheel backspacing of 5.5 inches
- Listed lift height range of 4 to 5.5 inches
Wheel backspacing and clearance
Wheel backspacing sets how far the wheel sits inward or outward in the fender, and it has a large effect on tire clearance and steering. A lift changes how the tire and wheel sit in the wheel well, so a backspacing that worked before a lift may rub after one. Check clearance with the tires mounted, not just on the bench.
A block and u-bolt rear lift moves the rear axle, which changes the pinion angle and can add driveline vibration if the angle is set wrong. Recheck the rear axle position after the first few drives and whenever the truck is loaded heavily. Look for loose u-bolts, wear on the shock mounts and uneven tire wear as the setup settles.
- Check tire rub at full steering lock
- Recheck u-bolt torque after the first drives
- Measure the fender gap on both sides
Specifications
| Brand | Rough Country |
|---|---|
| Part number | R/C381.20 |
| Shock series | N3 |
| Front shocks | N3 |
| Rear shocks | N3 |
| Rear lift component | Block and u-bolt |
| Recommended tire size | 35×12.50 |
| Recommended wheel backspacing | 5.5 inches |
| Lift height range | 4 to 5.5 inches |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 2002–2005 Dodge Ram 1500 in the Laramie, SLT and ST versions.
Ram 1500 model years outside 2002–2005, and Ram 2500 and 3500 trucks, are not on the list.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A block and u-bolt rear lift changes the rear axle location, so check the driveline angles and the rear alignment after installation. Recheck the wheel clearance once the tires are mounted.
What’s included
N3 front and rear shocks and the block and u-bolt rear lift components.









