Overview
The Rough Country 5-inch Dodge suspension lift kit with N3 shocks, part number R/C382.23, fits the 1994–2002 Dodge Ram 2500 Base. It uses a block and u-bolt rear lift with add-a-leaf components and provides a lift height range of 4 to 5.5 inches.
The kit includes the Dodge 2500 Control Arm Drop Bracket System, which lowers the stock control arms to a reduced mounting angle. This avoids the steep mounting angle often seen on 5-inch and larger kits and supports ride quality and caster angle.
N3 shocks are custom tuned for the weight of the truck, with velocity-sensitive valving and 10-stage variable valving that needs no further adjustment. Shocks are included at both ends.
Key features
- Control Arm Drop Bracket System
- N3 shocks at the front and rear
- 10-stage variable valving with velocity-sensitive technology
- Add-a-leaf rear lift with block and u-bolt
- Designed for 35-inch tires
- Listed lift height range of 4 to 5.5 inches
Shock tuning and ride height
Shock tuning affects how a lifted truck handles bumps, braking and steering, and a heavier truck needs valving that suits its weight. Velocity-sensitive valving changes resistance with how fast the shock moves, which helps the ride feel controlled at different speeds. Keeping matched shocks front and rear helps the truck settle evenly.
Add-a-leaf components and block and u-bolt rear lifts change the rear ride height and the driveline angles, so the rear end should be checked after installation. Driveline vibration, a squat at the rear or tires rubbing inside the fender are signs the rear setup needs attention. Check the rear level once the truck is loaded and again when it is empty.
- Check rear level with the truck loaded and empty
- Inspect add-a-leaf clamps for looseness
- Recheck control arm angles after any suspension work
Specifications
| Brand | Rough Country |
|---|---|
| Part number | R/C382.23 |
| Lift kit | 5 inches |
| Shock series | N3 |
| Front shocks | N3 |
| Rear shocks | N3 |
| Rear lift method | Add-a-leaf |
| Rear lift component | Block and u-bolt with add-a-leafs |
| Tire size | 35 inches |
| Shocks included | Yes |
| Lift height range | 4 to 5.5 inches |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 1994–2002 Dodge Ram 2500 Base.
Ram 1500 and Ram 3500 models, and 2003 and later Ram 2500 trucks, are not on the list.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The drop bracket system changes the control arm mounting angle, so check the alignment after the lift is installed. Add-a-leaf rear components also change the rear ride height, so check the rear level and the driveline angles.
What’s included
N3 front and rear shocks, the control arm drop brackets, the block and u-bolt rear components with add-a-leafs, and the hardware for the kit.









