Overview
The Rough Country 4.75 Inch GM Body and Suspension Combo Lift Kit with N3 Shocks and Forged Upper Control Arms, part number 294.20, combines a 1.25 inch body lift with a 3.5 inch suspension lift for a total lift of 4.75 inches. It fits the 2014–2015 Chevrolet Silverado 1500 in the High Country, LS, LT, LTZ, SSV and WT trims, and the 2014–2015 GMC Sierra 1500 in the Base, Denali, SLE and SLT trims.
N3 shocks are fitted at the front and rear and are valved for this vehicle and lift combination. The kit also includes MOOG ball joints and fabricated rear blocks.
The kit combines a 1.25 inch body lift with a 3.5 inch suspension lift. Because a body lift changes the body’s position on the frame, check the body mounts after fitting, and inspect any brake or wiring lines that cross the body for stretch.
Key features
- 1.25 inch body lift combined with a 3.5 inch suspension lift
- N3 shocks valved for this lift combination
- 10-stage velocity sensitive valving
- MOOG ball joints with powdered-metal gusher bearings
- Sealed boot with grease-relief valve
- Fabricated rear blocks
Body lift considerations
A body lift moves the cab and bed up on the frame, while a suspension lift raises the axles and wheels. Combining both changes the relative position of the body, the wiring, the fuel and brake lines, and the driveline. Before and after fitting, check the body mounts for even gaps and confirm nothing is pinched when the cab rests on the new spacers.
Inspect the lines that cross the gap between body and frame for stretch or chafing, and check the wiring harness at the grommets. Ball joints with sealed boots and grease-relief valves are easier to service after the lift, so keep a grease gun handy for periodic checks.
- Check body mount gaps for even spacing
- Inspect brake lines and wiring at the body gap
- Grease ball joints periodically through the relief valve
Specifications
| Brand | Rough Country |
|---|---|
| Part number | 294.20 |
| Lift | 4.75 inch (title) |
| Lift height range | 4 to 5.5 inches |
| Body lift | 1.25 inch |
| Suspension lift | 3.5 inch |
| Front shocks | N3 |
| Rear shocks | N3 |
| Ball joints | MOOG |
| Rear blocks | Fabricated |
Vehicle fitment
Fits the 2014–2015 Silverado 1500 in the High Country, LS, LT, LTZ, SSV and WT trims, and the 2014–2015 Sierra 1500 in the Base, Denali, SLE and SLT trims.
Years outside 2014–2015, and the 2500 and 3500 trucks, are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the kit combines a body lift with a suspension lift, check the body mounts and the lift height before fitting. The MOOG ball joints have a sealed boot with a grease-relief valve, so the joints can be serviced after fitting.
What’s included
N3 shocks, MOOG ball joints, fabricated rear blocks and the body lift and suspension lift components.









