Skid plates explained: what each one protects, steel vs aluminum vs UHMW, thickness, belly pans, drain access, heat, lift kit effects and what to…
Skid Plates
Showing 85–96 of 149 resultsSorted by popularity
-
Skid Plates
JcrOffroad Evap Canister Skid Plate (Black) – JKSD-VP-PC
- Evap canister skid for Jeep Wrangler JK models with 3.8L or 3.6L engines
- Made from 3/16-inch steel, bent and formed for a precise fit
- Black powder coat, designed and manufactured in the USA
- Fits 2007-2016 Jeep Wrangler JK, two- and four-door models
- Evap canister sold separately
SKU: JCRJKSD-VP-PC -
Skid Plates
JcrOffroad Front Lower Bumper Skid (Black) – JKSD-VCM-PC
- JcrOffroad JKSD-VCM-PC front lower bumper skid, black powder coat
- Fits 2007–2016 Jeep Wrangler (JK), two-door and Unlimited four-door
- Made from 3/16-inch steel in the U.S.A.
- Works only with JCR Vanguard, Crusader and Mauler front bumpers
SKU: JCRJKSD-VCM-PC -
Skid Plates
JcrOffroad Lower Control Arm Skid Plates (Bare Steel) – JKF-LCAS
- Reinforces and protects the lower control arms on Jeep Wrangler JK models
- CNC cut and formed from 3/16-inch steel, bare finish
- Works with Dana 44 or Dana 30 front axles
- Weld-on installation, supplied as a pair, made in the U.S.A.
SKU: JCRJKF-LCAS -
Skid Plates
Transmission and Oil Pan Skid Plate
- Bare steel transmission and oil pan skid for Jeep Wrangler JK models
- 12-gauge steel with stainless steel mounting hardware
- Designed to be fitted with the Fab Fours Transfer Case Skid
- Weight 35 lb, 21 by 16 by 48 inches
- Fits 2007-2018 Jeep Wrangler JK models
SKU: FFIJK3032-B -
Skid Plates
Transmission and Oil Pan Skid Plate
- Protects the engine oil pan and transmission on Jeep Wrangler JK models
- 2-stage matte black powder coat over 12-gauge steel
- Stainless steel mounting hardware
- Weight 35 lb, 21 by 16 by 48 inches
- Fits 2007-2018 Jeep Wrangler JK and Unlimited
SKU: FFIJK3032-1 -
Skid Plates
Transfer Case Skid Plate
- Bare steel transfer case skid for Jeep Wrangler JK models
- 12-gauge steel with stainless steel mounting hardware
- Designed to be fitted with the Fab Fours oil pan and gas tank skids
- Weight 40 lb, 21 by 16 by 48 inches
- Fits 2007-2018 Jeep Wrangler JK models
SKU: FFIJK3031-B -
-
-
Skid Plates
Gas Tank Skid Plate
- Protects the fuel tank underside on Jeep Wrangler JK models
- Designed to work with the Fab Fours Transfer Case Skid in the Armor System
- 12-gauge steel, 2-stage matte black powder coat
- Stainless steel mounting hardware, made in the USA
- Fits 2007-2018 Jeep Wrangler JK and Unlimited models
SKU: FFIJK3030-1
What skid plates protect
The parts most exposed on a trail are rarely the strongest. Skid plates shield the components that cost the most to replace or that leave you stranded when damaged. Common targets include the oil pan, transmission, transfer case, fuel tank, differential covers, steering box and the axle ends of lower control arms. Some plates are single-purpose, while others bolt together as a full underbody set.
Steel, aluminum or stainless
- Steel is strong, repairable and usually the most affordable, though heavy and prone to rust if the coating is scratched.
- Aluminum weighs much less, which helps unsprung weight and handling, but gouges more easily and is harder to weld in the field.
- Stainless resists corrosion and slides over rock well but is generally priced higher.
Plate thickness matters. A thicker gauge resists denting but adds weight, so match the thickness to the terrain. Rock crawling calls for more protection than forest roads.
Design points to compare
- Coverage: does it protect the part and its surrounding mounts and linkages?
- Mounting: bolt-on plates use existing holes, and some require drilling or welding.
- Shape: sloped, smooth bottoms let rocks slide; flat ones can catch.
- Access: drain plugs, fill ports and filter access should remain usable.
- Finish: powder coat, bare or stainless.
Fitment and clearance
Skid plates are vehicle-specific. Differences in model year, engine, transfer case or wheelbase change the mounting points, so confirm fitment for your exact year, make, model and drivetrain. Note whether the part is for the front or rear, two-door or four-door versions, or a specific component like a control arm skid. Plates add thickness underneath, so check that they do not lower ground clearance more than expected.
Installation notes
Most bolt-on plates install with hand tools and a jack or lift. Use thread locker where the instructions call for it and torque bolts to the specified values. Recheck bolts after the first trail run, because vibration and impacts can loosen them. Heavy plates are awkward to hold overhead, so a transmission jack or a helper makes the job safer.
Maintenance and mistakes to avoid
After each trail outing, inspect plates for bent edges, cracked welds and sheared bolts. A dented plate that now touches the component it protects can transmit impacts into it, so straighten or replace it. Rinse mud from around the mounts, because trapped dirt holds moisture against the frame and speeds up rust.
- Do not tighten bolts beyond the instructions, as stripped threads in frame brackets are hard to repair.
- Do not block airflow to a transmission or transfer case in hot climates. Some designs include vents or open sections for that reason.
- Skid plates are not a substitute for recovery points or sound driving. Pick a line that avoids hard strikes whenever you can.
- Check your drain plug access before buying, since a plate that needs removal for every oil change becomes a chore.
Pairs of components are often protected together. For example, many owners pair a transfer case plate with rock sliders and control arm skids so one hit does not undo the other protection.
Related guides
- Skid Plates Explained: Transfer Case, Transmission, Tank
- The Best Modern 4X4s for Overland Travel
Twelve current 4X4s judged the overland way: payload, range, clearance, lockers, roof load and aftermarket support, with the numbers from each maker.
- Wrangler vs Bronco vs 4Runner: The Engineering Compared
Wrangler, Bronco and 4Runner compared on frames, axles, transfer cases, crawl ratios, lockers, travel and angles, using each maker's own spec sheets.
Popular Skid Plates brands
- Rubicon Express (17)
- Skid Row Off Road (15)
- Poison Spyder Customs (15)
- Artec Industries (10)
- Rugged Ridge (10)
- Pro Comp Suspension (9)
- Rock Hard 4x4 Parts (7)
- ARB 4x4 Accessories (7)
- JcrOffroad (6)
- TeraFlex (6)
- Rancho (6)
- Fab Fours (6)
Skid Plates FAQ
Do I need skid plates for light trail use?
Not always, but they help on rocky or rutted trails where the oil pan, transfer case or fuel tank could strike obstacles. If you only drive graded roads, factory protection may be enough.
Is aluminum or steel better for skid plates?
Steel is stronger and easier to repair but heavier. Aluminum saves weight but dents and gouges more readily. Choose steel for rock crawling and aluminum if weight is a bigger concern than outright toughness.
Will skid plates reduce ground clearance?
Slightly, because the plate hangs below the part it protects. Most designs are thin and tucked close to the component. Check the listed dimensions and your clearance before installing.
Can I install skid plates myself?
Many bolt-on designs can be installed with basic tools and a jack. Plates needing drilling or welding are better handled by a shop. Support heavy plates securely and tighten hardware to the stated torque.











