Overview
The JcrOffroad Lower Control Arm Skid Plates, part number JKF-LCAS, protect and reinforce the lower control arms on the 2007-2016 Jeep Wrangler JK. The plates are supplied as a pair, one for each side, and are made for Dana 44 or Dana 30 front axles.
The plates are CNC cut and formed from 3/16-inch steel. They are welded on rather than bolted, so the installation requires welding. The plates give the control arms a protective shield against trail damage.
Key features
- Protects the lower control arms from trail damage
- Designed for Dana 44 or Dana 30 front axles
- CNC cut and formed 3/16-inch steel
- Bare steel finish
- Weld-on installation
- Supplied as a pair, made in the U.S.A.
Weld-on work and control arm wear
Lower control arms carry braking and driving loads, so any work on them deserves care. Welding near the arm bushings and ball joint ends can heat the rubber and grease, which shortens their life, so protect those parts with heat shielding or remove them before welding. Clean the mounting surfaces to bare metal and fit the plates in place before tacking, so the alignment is correct on the first pass.
Skid plates reduce the chance that rocks dent or bend the arms, but they also add weight to the lower suspension. Inspect the bushings, ball joints and boot seals after installation and at regular service intervals. Because the plates are welded rather than bolted, removing them later is difficult, so decide on the fit carefully.
- Shield bushings and ball joints during welding
- Clean mating surfaces to bare metal before fitting
- Inspect boots and joints after the first drives
Specifications
| Brand | JcrOffroad |
|---|---|
| Part number | JKF-LCAS |
| UPC | 70000778862 |
| Material | 3/16-inch steel, CNC cut and formed |
| Finish | Bare steel |
| Quantity | Pair |
| Axle compatibility | Dana 44 or Dana 30 front axles |
| Installation | Welding required |
Vehicle fitment
JcrOffroad lists these plates for the 2007-2016 Jeep Wrangler (JK), including the Unlimited models.
The list does not include the Wrangler JL or the Wrangler TJ and LJ. The plates are for front axles, so check that your front axle is a Dana 44 or Dana 30 before welding. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the plates are weld-on, the installation needs welding equipment and cannot be done as a bolt-on job.
What’s included
A pair of lower control arm skid plates, one for each side. Check the package contents and welding supplies against your installation before starting.









