Overview
The JcrOffroad Evap Canister Skid Plate, part number JKSD-VP-PC, protects the evaporative emissions canister on the Jeep Wrangler JK. It fits 2007 to 2016 Wrangler JK models with 3.8L or 3.6L engines, in both two-door and four-door versions.
The skid is made from 3/16-inch steel, bent and formed for a precise fit, and finished in black powder coat. It is designed and manufactured in the USA. The evap canister is not included, so the skid is for owners who already have the canister in place.
Key features
- Protects the evap canister on the Wrangler JK
- 3/16-inch steel, bent and formed for a precise fit
- Black powder coat finish
- Designed and manufactured in the USA
- Suited to 3.8L and 3.6L engines
Preparing the drill work
Skid plates for an evap canister mainly protect the canister and its lines from stones and debris kicked up from below the vehicle. Because the canister hangs in a tight space near the frame and fuel system, the skid has to clear nearby lines and brackets. Before drilling, hold the plate in position, mark the mounting points, and confirm that nothing sits behind the spot where the bit will exit.
Once drilled, remove burrs from each hole and treat bare metal edges with touch-up paint so rust does not start under the powder coat. Re-check the fasteners after the first few trail runs, and look over the canister lines during routine service. A skid that is loose or rubbing can wear through a hose, so any new rattle is worth investigating.
- Mark and center each mounting point before drilling
- Deburr holes and seal bare metal
- Check fuel and vapor lines for clearance
Specifications
| Brand | JcrOffroad |
|---|---|
| Part number | JKSD-VP-PC |
| UPC | 700007276721 |
| Material | 3/16-inch steel |
| Finish | Black powder coat |
| Body style | Two-door and four-door |
| Engine | 3.8L or 3.6L |
| Type | Evap canister skid |
| Installation | Cutting or drilling required |
Vehicle fitment
It fits the 2007-2016 Jeep Wrangler (JK), including Unlimited models with the 3.8L or 3.6L engine.
It does not fit the Wrangler JL or the Wrangler TJ and LJ. Check the engine before ordering, since it fits the 3.8L and 3.6L only. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Installation requires cutting or drilling for the mounts, so plan to drill and check the fit against your canister before finishing the install.
What’s included
The evap canister skid plate.
Not included: the evap canister, which is sold separately.





















