Overview
The Fab Fours Transmission and Oil Pan Skid Plate, part number JK3032-1, protects the engine oil pan and transmission on the Jeep Wrangler JK. It fits 2007 to 2018 Wrangler and Wrangler Unlimited, and it is designed to work with the Transfer Case Skid in the Armor System.
The plate is 12-gauge steel, 3/16-inch thick, with a 2-stage matte black powder coat. It uses stainless steel mounting hardware and is made in the USA. Installation requires cutting or drilling.
Key features
- Covers the engine oil pan and transmission
- Works with the Fab Fours Transfer Case Skid
- 2-stage matte black powder coat finish
- Stainless steel mounting hardware
- Grade 8 or equivalent hardware for the mounts
- Made in the USA
Oil changes with a skid fitted
A plate under the engine oil pan and transmission changes how those components are reached during service. Oil changes, transmission fluid checks and filter work all require access underneath, so a skid that is hard to remove turns a short job into a lengthy one. Plan the removal process before the first service after installation.
Oil pans take hits from rocks more often than most parts, and a dent in the pan can crack its seam or damage the drain plug. A skid stops many of those hits, but the panel itself can bend in a hard strike and push against the pan. Inspect both after rough terrain.
Engine and transmission weight sits above the plate’s mounting points. Mounting hardware that loosens over time can let the plate knock against the pan, so recheck the bolts periodically. Route any new brackets or accessories so they do not rub against the pan or the transmission housing.
- Confirm drain plug access before each oil service
- Inspect the pan seam after hard impacts
- Recheck mounting bolts periodically
- Keep brackets clear of the pan and transmission housing
Specifications
| Brand | Fab Fours |
|---|---|
| Part number | JK3032-1 |
| UPC | 5810114183 |
| Position | Engine oil pan and transmission |
| Material | 12-gauge steel, 3/16-inch thick |
| Finish | 2-stage matte black powder coat |
| Mounting hardware | Stainless steel, Grade 8 or equivalent |
| Weight | 35 lb |
| Height | 21 inches |
| Width | 16 inches |
| Length | 48 inches |
| Installation | Cutting or drilling required |
Vehicle fitment
It fits the 2007-2018 Jeep Wrangler (JK), including the Unlimited models.
The list does not include the Wrangler JL or the TJ and LJ generations. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Installation requires cutting or drilling. It is designed to be fitted with the Transfer Case Skid, so plan both pieces together.
What’s included
One transmission and oil pan skid plate with stainless steel mounting hardware.





