Skid plates explained: what each one protects, steel vs aluminum vs UHMW, thickness, belly pans, drain access, heat, lift kit effects and what to…
Skid Plates
Showing 73–84 of 149 resultsSorted by popularity
-
Skid Plates
Rubicon Express Evaporator Skid Plate (Black) – REA1017
- Evaporator canister skid plate for 2-door and 4-door Jeep Wrangler JK models
- Made for the 2007–2018 Jeep Wrangler (JK)
- Formed from 3/16-inch steel with a black powder coat
- No cutting or drilling required for installation
- Part number REA1017
SKU: R/EREA1017 -
Skid Plates
Rubicon Express Transfer Case Skid Plate (Black) – REA1014
- Transfer case skid plate for the 2007–2018 Jeep Wrangler (JK), 2-door and 4-door
- Part number REA1014, 3/16-inch steel with black powder coat
- Mounts high and tight on the existing hardware with no cutting or drilling
- Reduces obstacle hang-ups and improves slide-over on rough terrain
SKU: R/EREA1014 -
-
Skid Plates
Rancho Front Differential Glide Plate (Red Powdercoat) – RS6212
- Red powder-coated differential glide plate for Dana 44 front axle
- Protects the axle casting from contact over obstacles
- No cutting or drilling required
- Fits 2007–2016 Jeep Wrangler JK, 2-door and Unlimited 4-door
SKU: RANRS6212 -
Skid Plates
Rancho Control Arm Skid Plate (Black) – RS6210B
- Rancho control arm skid plate, part number RS6210B
- Fits 2007-2016 Jeep Wrangler JK and 1997-2006 Wrangler TJ per the manufacturer list
- 3/16 in. steel, black powder coat, bolt-on without cutting or drilling
- Mounts to the front lower control arms (axle end)
SKU: RANRS6210B -
Skid Plates
Poison Spyder EVAP Skid Plate (Black) – 17-56-012
- Fits 2007–2011 Jeep Wrangler (JK), 2-door and 4-door models
- Protects the EVAP canister under the floorboard from rocks and trail obstacles
- 3/16 inch steel plate, laser cut and brake formed
- Satin black powder coat finish
- Adds an extra 3/4 inch of ground clearance
- Complete kit with hardware and install instructions
SKU: PSC17-56-012 -
-
Skid Plates
Mountain Off Road Enterprises Front Skid Plate (Black) – JKFSP07
- Front skid plate for 2007-2012 Jeep Wrangler JK, 2 and 4-door models
- Protects the electronic sway bar disconnect and steering components
- 3/16-inch plate steel, black powder coat
- Bolt-on, no cutting or drilling required
SKU: MREJKFSP07 -
-
Skid Plates
JcrOffroad NP231 Transfer Case Skid Plate (Black) – XJSD-TC231P
- Transfer case skid plate for Cherokee models with the factory cross member
- Frame rail to frame rail protection from 3/16-inch high strength steel
- Does not require modification to the catalytic converter
- Black powder coat, made in the U.S.A.
- Drilling 10 holes, with all hardware provided
SKU: JCRXJSD-TC231P -
What skid plates protect
The parts most exposed on a trail are rarely the strongest. Skid plates shield the components that cost the most to replace or that leave you stranded when damaged. Common targets include the oil pan, transmission, transfer case, fuel tank, differential covers, steering box and the axle ends of lower control arms. Some plates are single-purpose, while others bolt together as a full underbody set.
Steel, aluminum or stainless
- Steel is strong, repairable and usually the most affordable, though heavy and prone to rust if the coating is scratched.
- Aluminum weighs much less, which helps unsprung weight and handling, but gouges more easily and is harder to weld in the field.
- Stainless resists corrosion and slides over rock well but is generally priced higher.
Plate thickness matters. A thicker gauge resists denting but adds weight, so match the thickness to the terrain. Rock crawling calls for more protection than forest roads.
Design points to compare
- Coverage: does it protect the part and its surrounding mounts and linkages?
- Mounting: bolt-on plates use existing holes, and some require drilling or welding.
- Shape: sloped, smooth bottoms let rocks slide; flat ones can catch.
- Access: drain plugs, fill ports and filter access should remain usable.
- Finish: powder coat, bare or stainless.
Fitment and clearance
Skid plates are vehicle-specific. Differences in model year, engine, transfer case or wheelbase change the mounting points, so confirm fitment for your exact year, make, model and drivetrain. Note whether the part is for the front or rear, two-door or four-door versions, or a specific component like a control arm skid. Plates add thickness underneath, so check that they do not lower ground clearance more than expected.
Installation notes
Most bolt-on plates install with hand tools and a jack or lift. Use thread locker where the instructions call for it and torque bolts to the specified values. Recheck bolts after the first trail run, because vibration and impacts can loosen them. Heavy plates are awkward to hold overhead, so a transmission jack or a helper makes the job safer.
Maintenance and mistakes to avoid
After each trail outing, inspect plates for bent edges, cracked welds and sheared bolts. A dented plate that now touches the component it protects can transmit impacts into it, so straighten or replace it. Rinse mud from around the mounts, because trapped dirt holds moisture against the frame and speeds up rust.
- Do not tighten bolts beyond the instructions, as stripped threads in frame brackets are hard to repair.
- Do not block airflow to a transmission or transfer case in hot climates. Some designs include vents or open sections for that reason.
- Skid plates are not a substitute for recovery points or sound driving. Pick a line that avoids hard strikes whenever you can.
- Check your drain plug access before buying, since a plate that needs removal for every oil change becomes a chore.
Pairs of components are often protected together. For example, many owners pair a transfer case plate with rock sliders and control arm skids so one hit does not undo the other protection.
Related guides
- Skid Plates Explained: Transfer Case, Transmission, Tank
- The Best Modern 4X4s for Overland Travel
Twelve current 4X4s judged the overland way: payload, range, clearance, lockers, roof load and aftermarket support, with the numbers from each maker.
- Wrangler vs Bronco vs 4Runner: The Engineering Compared
Wrangler, Bronco and 4Runner compared on frames, axles, transfer cases, crawl ratios, lockers, travel and angles, using each maker's own spec sheets.
Popular Skid Plates brands
- Rubicon Express (17)
- Skid Row Off Road (15)
- Poison Spyder Customs (15)
- Artec Industries (10)
- Rugged Ridge (10)
- Pro Comp Suspension (9)
- Rock Hard 4x4 Parts (7)
- ARB 4x4 Accessories (7)
- TeraFlex (6)
- Rancho (6)
- Fab Fours (6)
- JcrOffroad (6)
Skid Plates FAQ
Do I need skid plates for light trail use?
Not always, but they help on rocky or rutted trails where the oil pan, transfer case or fuel tank could strike obstacles. If you only drive graded roads, factory protection may be enough.
Is aluminum or steel better for skid plates?
Steel is stronger and easier to repair but heavier. Aluminum saves weight but dents and gouges more readily. Choose steel for rock crawling and aluminum if weight is a bigger concern than outright toughness.
Will skid plates reduce ground clearance?
Slightly, because the plate hangs below the part it protects. Most designs are thin and tucked close to the component. Check the listed dimensions and your clearance before installing.
Can I install skid plates myself?
Many bolt-on designs can be installed with basic tools and a jack. Plates needing drilling or welding are better handled by a shop. Support heavy plates securely and tighten hardware to the stated torque.












