Skid plates explained: what each one protects, steel vs aluminum vs UHMW, thickness, belly pans, drain access, heat, lift kit effects and what to…
Skid Plates
Showing 109–120 of 149 resultsSorted by popularity
-
Skid Plates
Body Armor Front Skid Plate (Black) – JK-5123
- Front skid plate for Jeep JK, 3/16-inch steel with textured black powder coat
- Protects the front undercarriage and the electronic sway bar disconnect on Rubicon models
- Works with the Body Armor bumper or the stock bumper
- Fits 2007-2018 Jeep Wrangler JK; drilling required for 2010-2015
SKU: B/AJK-5123 -
Skid Plates
ARB Engine and Gearbox Skid Plate (Gray Powdercoat) – 5450110
- Protects the engine oil pan and transmission on the Jeep Wrangler JK
- Cradles the full oil pan while keeping the drain plug accessible
- Front axle and suspension can travel fully through the panel
- Narrow rear section clears aftermarket long arm kits
- Fits 2012-2016 Jeep Wrangler JK models
SKU: ARB5450110 -
Skid Plates
ARB Under Vehicle Protection Skid Plate (Gray Powdercoat) – 5421110
- Kinetic suspension version of the ARB undercarriage skid system for Toyota SUVs
- Protects steering, engine oil pan, transmission and transfer case
- Front panel has a lower bulge for the Kinetic sway bar position
- Pressed and folded 3mm steel, zinc plated, gray powder coat
- Fits 2007-2014 Toyota FJ Cruiser and 2002-2011, 2013-2016 Toyota Land Cruiser
SKU: ARB5421110 -
Skid Plates
ARB Under Vehicle Protection Skid Plate (Gray Powdercoat) – 5421100
- Protects the steering, engine oil pan, transmission and transfer case, depending on model
- Pressed and folded 3mm steel panels, zinc plated and powder coated
- Recessed mounting bolts in vulnerable areas, so panels can be removed for servicing
- Prado 120 and 150, 4Runner and FJ Cruiser (no model years listed)
- Prado 150 and 2010 and newer 4Runner with Kinetic suspension need part 5421110
SKU: ARB5421100 -
Skid Plates
ARB Skid Plate (Gray Powdercoat) – 4420110
- Optional skid plate for ARB rock sliders, adding a smooth surface under them
- Designed to slide over obstacles easily
- Mounts to ARB rock slider part number 4420100
- Gray powder coat finish, no cutting or drilling required
- Fits the 2007-2014 Toyota FJ Cruiser
SKU: ARB4420110 -
Skid Plates
Artec Industries Nighthawk Front Swaybar Skid Plate – JL5304
- Front sway bar skid plate for the electronic sway bar disconnect on Jeep Wrangler JL
- 3/16-inch CNC laser cut and formed steel, fully welded
- Protects the factory frame extensions under the front bumper
- Bare steel, bolt-on with no cutting or drilling required
- Fits 2018-2026 Wrangler JL, 2- and 4-door
SKU: A/IJL5304 -
-
-
Skid Plates
Artec Heavy-Duty Crossmember with Link Mounts (Bare Steel) – JK2004
- Artec JK2004 heavy-duty crossmember with link mounts, bare steel
- Fits 2007–2016 Jeep Wrangler (JK) two- and four-door trims
- 1/4-inch thick steel, pre-welded
- Fits 2.625-inch wide joints or bushings with 9/16-inch through holes
SKU: A/IJK2004 -
Skid Plates
Artec JK Under Armor Belly Pan Kit (Natural Aluminum) – JK1020
- Artec JK Under Armor belly pan kit, JK1020, natural aluminum
- Fits 2007–2016 Jeep Wrangler (JK) two-door trims
- 1/4-inch 6061 aluminum skid plate with 3/16-inch zinc plated steel brackets
- Modular, with all bolts countersunk under the skid
SKU: A/IJK1020
What skid plates protect
The parts most exposed on a trail are rarely the strongest. Skid plates shield the components that cost the most to replace or that leave you stranded when damaged. Common targets include the oil pan, transmission, transfer case, fuel tank, differential covers, steering box and the axle ends of lower control arms. Some plates are single-purpose, while others bolt together as a full underbody set.
Steel, aluminum or stainless
- Steel is strong, repairable and usually the most affordable, though heavy and prone to rust if the coating is scratched.
- Aluminum weighs much less, which helps unsprung weight and handling, but gouges more easily and is harder to weld in the field.
- Stainless resists corrosion and slides over rock well but is generally priced higher.
Plate thickness matters. A thicker gauge resists denting but adds weight, so match the thickness to the terrain. Rock crawling calls for more protection than forest roads.
Design points to compare
- Coverage: does it protect the part and its surrounding mounts and linkages?
- Mounting: bolt-on plates use existing holes, and some require drilling or welding.
- Shape: sloped, smooth bottoms let rocks slide; flat ones can catch.
- Access: drain plugs, fill ports and filter access should remain usable.
- Finish: powder coat, bare or stainless.
Fitment and clearance
Skid plates are vehicle-specific. Differences in model year, engine, transfer case or wheelbase change the mounting points, so confirm fitment for your exact year, make, model and drivetrain. Note whether the part is for the front or rear, two-door or four-door versions, or a specific component like a control arm skid. Plates add thickness underneath, so check that they do not lower ground clearance more than expected.
Installation notes
Most bolt-on plates install with hand tools and a jack or lift. Use thread locker where the instructions call for it and torque bolts to the specified values. Recheck bolts after the first trail run, because vibration and impacts can loosen them. Heavy plates are awkward to hold overhead, so a transmission jack or a helper makes the job safer.
Maintenance and mistakes to avoid
After each trail outing, inspect plates for bent edges, cracked welds and sheared bolts. A dented plate that now touches the component it protects can transmit impacts into it, so straighten or replace it. Rinse mud from around the mounts, because trapped dirt holds moisture against the frame and speeds up rust.
- Do not tighten bolts beyond the instructions, as stripped threads in frame brackets are hard to repair.
- Do not block airflow to a transmission or transfer case in hot climates. Some designs include vents or open sections for that reason.
- Skid plates are not a substitute for recovery points or sound driving. Pick a line that avoids hard strikes whenever you can.
- Check your drain plug access before buying, since a plate that needs removal for every oil change becomes a chore.
Pairs of components are often protected together. For example, many owners pair a transfer case plate with rock sliders and control arm skids so one hit does not undo the other protection.
Related guides
- Skid Plates Explained: Transfer Case, Transmission, Tank
- The Best Modern 4X4s for Overland Travel
Twelve current 4X4s judged the overland way: payload, range, clearance, lockers, roof load and aftermarket support, with the numbers from each maker.
- Wrangler vs Bronco vs 4Runner: The Engineering Compared
Wrangler, Bronco and 4Runner compared on frames, axles, transfer cases, crawl ratios, lockers, travel and angles, using each maker's own spec sheets.
Popular Skid Plates brands
- Rubicon Express (17)
- Poison Spyder Customs (15)
- Skid Row Off Road (15)
- Rugged Ridge (10)
- Artec Industries (10)
- Pro Comp Suspension (9)
- Rock Hard 4x4 Parts (7)
- ARB 4x4 Accessories (7)
- Rancho (6)
- Fab Fours (6)
- JcrOffroad (6)
- TeraFlex (6)
Skid Plates FAQ
Do I need skid plates for light trail use?
Not always, but they help on rocky or rutted trails where the oil pan, transfer case or fuel tank could strike obstacles. If you only drive graded roads, factory protection may be enough.
Is aluminum or steel better for skid plates?
Steel is stronger and easier to repair but heavier. Aluminum saves weight but dents and gouges more readily. Choose steel for rock crawling and aluminum if weight is a bigger concern than outright toughness.
Will skid plates reduce ground clearance?
Slightly, because the plate hangs below the part it protects. Most designs are thin and tucked close to the component. Check the listed dimensions and your clearance before installing.
Can I install skid plates myself?
Many bolt-on designs can be installed with basic tools and a jack. Plates needing drilling or welding are better handled by a shop. Support heavy plates securely and tighten hardware to the stated torque.














