Overview
The Fab Fours Transfer Case Skid Plate in bare steel, part number JK3031-B, guards the transfer case on the Jeep Wrangler JK. It is the uncoated version of the JK3031-1 and uses 12-gauge steel with stainless steel mounting hardware. It fits 2007 to 2018 Wrangler and Wrangler Unlimited models.
The plate is designed to be fitted with the Fab Fours Oil Pan Skid and Gas Tank Skid as part of the Armor System. It is 3/16 inch thick and made in the USA. Installation requires cutting or drilling.
Key features
- Bare steel finish
- Protects the transfer case on Wrangler JK models
- Stainless steel mounting hardware
- Designed to be fitted with the oil pan and gas tank skids
- Made in the USA
Bare steel and the armor set
A bare steel guard is a practical choice when a coating is less important than the ability to weld, repair or repaint the plate in the field. Uncoated steel can be cut, bent and welded more easily, and damage can be patched on the spot. The trade-off is that the steel needs a protective finish applied by the owner.
When a set of plates is fitted together, mixing bare and coated pieces can look uneven once rust starts to show. Decide early whether the whole set will be painted, so the surfaces weather at a similar rate. Painting the plates before installing them is simpler than painting them in place.
Keep the transfer case area in mind when choosing a finish. Mud collects around the case and the drive shaft yokes, and bare steel stays wet longer in those spots. A rinse after muddy trips and a fresh coat of protective paint at the edges keep the plate in good shape.
- Paint the whole set at the same time for even weathering
- Clean and prime bare steel before the topcoat
- Rinse mud from around the case and shaft yokes
- Repaint damaged spots promptly
Specifications
| Brand | Fab Fours |
|---|---|
| Part number | JK3031-B |
| UPC | 5810114176 |
| Position | Transfer case |
| Material | 12-gauge steel, 3/16 inch thick |
| Finish | Bare steel |
| Mounting hardware | Stainless steel |
| Weight | 40 lb |
| Height | 21 inches |
| Width | 16 inches |
| Length | 48 inches |
| Installation | Cutting or drilling required |
Vehicle fitment
It fits the 2007-2018 Jeep Wrangler (JK), including the Unlimited models.
The Wrangler JL and the earlier TJ and LJ generations are not on the list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Installation requires cutting or drilling. Fab Fours designed this plate to be fitted with the oil pan skid, so the two should be planned together.
What’s included
One bare steel transfer case skid plate with stainless steel mounting hardware.





