Overview
The Fab Fours Gas Tank Skid Plate in bare steel, part number JK3030-B, is the uncoated version of the company’s fuel tank skid for the Jeep Wrangler JK. It fits 2007 to 2018 Wrangler and Wrangler Unlimited models and is designed to sit alongside the Fab Fours Transfer Case Skid.
The plate is made from 12-gauge steel with a 3/16-inch thickness and comes with stainless steel mounting hardware. It is always made in the USA. Because the mounts require cutting or drilling, this is a fabricated install rather than a simple bolt-on.
Key features
- Bare steel finish with no powder coat
- Covers the fuel tank on Wrangler JK models
- Stainless steel mounting hardware
- Designed to work with the Fab Fours Transfer Case Skid
- Made in the USA
Living with bare steel
Bare steel has no coating to protect it, so it depends on regular care to avoid rust. Surface rust that forms on the underside can often be scrubbed off and the steel sealed with a rust-inhibiting primer or paint. Keep an eye on the edges and bends, where moisture tends to collect and rust tends to start.
Bare steel also shows scrapes differently. A rock strike that would only chip a coated finish can leave bright metal visible, so inspect the plate after rough use. Light surface marks usually do no harm, but deeper gouges deserve quick treatment to keep corrosion from spreading under the surface.
Mud, salt and water can linger in the spaces around a bare plate, so rinse the underside after trips in wet or coastal conditions. Dry the mounting hardware as well, and replace any stainless fasteners that show staining or wear.
- Wipe off mud and grit after each trip
- Seal exposed steel at the edges and bends
- Inspect for gouges that expose bright metal
- Check stainless hardware for staining
Specifications
| Brand | Fab Fours |
|---|---|
| Part number | JK3030-B |
| UPC | 5810114152 |
| Position | Fuel tank |
| Material | 12-gauge steel, 3/16-inch thickness |
| Finish | Bare steel |
| Mounting hardware | Stainless steel |
| Weight | 65 lb |
| Height | 18 inches |
| Width | 12 inches |
| Length | 70 inches |
| Installation | Cutting or drilling required |
Vehicle fitment
It fits the 2007-2018 Jeep Wrangler (JK), including Unlimited models.
Other Wrangler generations, such as the JL, are not on the list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The mounts require cutting or drilling, so the plate is not a plug-in fit. It is designed to be fitted with the Transfer Case Skid and other plates in the Armor System.
What’s included
One bare steel gas tank skid plate with stainless steel mounting hardware.





