Overview
The Fab Fours Transmission and Oil Pan Skid Plate in bare steel, part number JK3032-B, protects the engine oil pan and transmission on the Jeep Wrangler JK. It is the uncoated version of the JK3032-1 and uses 12-gauge steel with stainless steel hardware. It fits 2007 to 2018 Wrangler and Wrangler Unlimited models.
The plate is designed to be fitted with the Fab Fours Transfer Case Skid. It is 3/16 inch thick and made in the USA. Installation requires cutting or drilling, so it is a fabricated install rather than a plug-in part.
Key features
- Bare steel finish with no powder coat
- Covers the engine oil pan and transmission on Wrangler JK models
- Stainless steel mounting hardware
- Designed to work with the Transfer Case Skid
- Made in the USA
Protecting the underside on rough trails
An underbody skid plate takes the impacts that would otherwise reach the oil pan and transmission case. Rocks, stumps and ledges can dent or crack a pan, and a damaged pan can lose oil quickly, so a plate underneath gives the lower engine and drivetrain a first line of defense on rough ground. Its flat surface also lets the vehicle slide over obstacles instead of catching on them.
Because a fabricated plate is cut and drilled to suit, the job is best done with the vehicle lifted securely and the fuel tank and exhaust clear of the work area. After each season of hard use, check the steel for dents, cracks at the mounting points and loose fasteners. Stainless hardware resists corrosion, but bare steel will rust where a scratch exposes it, so touch up chips early.
- Inspect mounting points for cracks after hard trail days
- Look for oil seepage around the pan gasket
- Retighten fasteners after the first few outings
Specifications
| Brand | Fab Fours |
|---|---|
| Part number | JK3032-B |
| UPC | 5810114190 |
| Position | Engine oil pan and transmission |
| Material | 12-gauge steel, 3/16 inch thick |
| Finish | Bare steel |
| Mounting hardware | Stainless steel |
| Weight | 35 lb |
| Height | 21 inches |
| Width | 16 inches |
| Length | 48 inches |
| Installation | Cutting or drilling required |
Vehicle fitment
It fits the 2007-2018 Jeep Wrangler (JK), including the Unlimited models.
The Wrangler JL and the TJ and LJ generations are not on the list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Installation requires cutting or drilling, so the plate is not a plug-in fit. Fab Fours designed it to be fitted with the Transfer Case Skid, so plan the plates together.
What’s included
One bare steel transmission and oil pan skid plate with stainless steel mounting hardware.





