Overview
The Artec Industries Nighthawk Front Swaybar Skid Plate, part number JL5304, protects the electronic sway bar disconnect under the front bumper on the Jeep Wrangler JL. It also covers the factory frame extensions. It fits 2018 to current Wrangler JL models, two- and four-door.
The plate is made from 3/16-inch CNC laser cut and formed steel and ships in bare steel. It is fully welded for bolt-on fitting, requiring no cutting or drilling. It is an add-on skid for the front of the JL.
Key features
- Protects the electronic sway bar disconnect
- Covers the factory frame extensions under the front bumper
- 3/16-inch CNC laser cut and formed steel
- Fully welded for immediate bolt-on fitting
- Bare steel finish
- No cutting or drilling required
Sway bar disconnect care
The electronic sway bar disconnect is a small actuator and connector area that sits at the front of the frame and can be struck by rocks at low approach angles. Shielding it helps keep the connector sealed and the mounting points intact. On a vehicle that sees rough trail use, the front skid is one of the first parts to show contact marks, so it is worth a quick look after each trip.
Steel that is left bare will begin to surface rust where it is scratched, especially in wet or salted conditions. Wipe off mud after trail runs, look for flaking, and touch up any bright spots with a suitable paint or primer. Keep the bolts snug, since a loose skid can rattle and wear the mounting holes over time.
- Wipe mud off after wet trail runs
- Touch up scratches before rust spreads
- Check bolts for looseness
Specifications
| Brand | Artec Industries |
|---|---|
| Part number | JL5304 |
| UPC | 816791028129 |
| Position | Front, under the bumper |
| Material | 3/16-inch steel, CNC laser cut and formed |
| Finish | Bare steel |
| Construction | Fully welded |
| Installation | Bolt-on, no cutting or drilling required |
Vehicle fitment
The short notes list this plate for the Jeep Wrangler JL from 2018 to current, in 2- and 4-door models.
The JL is shown here for 2018 to 2026, so later model years are not confirmed. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The plate is fully welded and ships ready to bolt on, with no cutting or drilling listed.
What’s included
The plate is fully welded and ready to bolt on, with no cutting or drilling required.


















