Overview
The Artec Industries Rear Axle LCA Bolt-on Skid Plate, part number JL4599, protects the factory lower control arm brackets on the Jeep Wrangler JL. It fits over the OEM bracket and has an integrated skid plate on the bottom, so the bracket is covered as well as reinforced.
The plate is made from 3/16-inch boxed steel with a bare steel finish. It is a heavy-duty skid that protects and reinforces the factory bracket before damage can occur. No cutting or drilling is required.
Key features
- Fits over the OEM lower control arm bracket
- Integrated skid plate on the bottom of the bracket
- 3/16-inch boxed steel
- Reinforces the factory bracket
- Bare steel finish
- No cutting or drilling required
Control arm bracket wear signs
The lower control arm bracket carries load from the axle to the frame, so cracks or bent metal near the mounting holes deserve attention. A bolt-on bracket guard keeps rock strikes off that area, but it does not change how the arm itself works. Inspect the factory bracket and the welds beneath the guard after each season of trail use.
Bare steel rusts when moisture gets trapped between the guard and the bracket, so look for flaking or pitting on contact surfaces. Painting exposed steel once the guard is in place slows corrosion. Replace worn bushings or arms if the axle moves more than expected, since a loose joint loads the bracket unevenly.
- Look for cracks around the bracket mounting holes
- Check control arm bushings for movement
- Repaint bare steel where scale appears
Specifications
| Brand | Artec Industries |
|---|---|
| Part number | JL4599 |
| UPC | 816791028648 |
| Position | Rear axle lower control arm |
| Material | 3/16-inch boxed steel plate |
| Finish | Bare steel |
| Type | Control arm skid |
| Installation | Bolt-on, no cutting or drilling required |
Vehicle fitment
It fits the 2018 Jeep Wrangler (JL).
Fit is confirmed for the 2018 Jeep Wrangler JL. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The plate is a bolt-on with no cutting or drilling required. It mounts over the factory bracket, which must be in place for the skid to fit.
What’s included
The rear axle lower control arm skid plate. Check the package contents against your installation before starting.














