Overview
The ARB Under Vehicle Protection Skid Plate, part number 5421110, is the Kinetic-suspension version of ARB’s undercarriage skid system for Toyota SUVs. Its front panel has a slightly lower bulge to make room for the Kinetic sway bar, which is why this kit differs from part 5421100.
Because this version is built around the Kinetic layout, its fitment differs from the standard kit, so check your vehicle’s suspension type against the fitment before ordering.
The kit is built from 3mm folded steel and protects the steering, engine oil pan, transmission and transfer case, depending on the model. The transmission panel is the same in both kits and suits petrol and diesel engines. The system works with ARB bull bars, side rails and steps, Airlocker and OME products.
Key features
- Built for the Kinetic suspension layout on Toyota SUVs
- Front panel lower bulge clears the Kinetic sway bar
- Transmission panel has a two-position mounting bracket for petrol and diesel engines
- Pressed and folded 3mm steel with zinc plating and powder coating
- Recessed mounting bolts in vulnerable areas for removal after damage
- Direct fit, no cutting or drilling required
Kinetic suspension fitment notes
Vehicles with Kinetic suspension have a different layout around the sway bar, and the lower bulge in the front panel exists to clear that component. A skid built for the standard layout can sit into the sway bar or the bar’s linkage, so matching the panel to the suspension type is more than a formality. Before any work starts, confirm which suspension your vehicle has.
The front panel is usually the first part of a skid system to take a hit, since it sits furthest forward. Inspect its bulge and mounting points after rough trail use, because a bent panel can push against the sway bar or the steering components above it. Straightening a panel by hand is often not enough, so replacing a damaged front panel is the safer course.
Changes to the suspension, such as a lift or new control arms, can shift the sway bar position. Any change like that should be checked against the skid’s clearance before you head out, since the bulge was shaped for one layout and a different geometry may leave less room.
- Verify suspension type before ordering or installing
- Inspect the front panel bulge after rough trail use
- Recheck clearance after any suspension change
- Replace a bent front panel rather than forcing it back
Specifications
| Brand | ARB 4×4 Accessories |
|---|---|
| Part number | 5421110 |
| UPC | 9332018006653 |
| Material | 3mm folded steel, zinc plated |
| Finish | Gray powder coat |
| Type | Undercarriage skid |
| Protects | Steering, engine oil pan, transmission, transfer case (depending on model) |
| Installation | Direct fit, no cutting or drilling required |
Vehicle fitment
It fits the 2007-2014 Toyota FJ Cruiser and the 2002-2011 and 2013-2016 Toyota Land Cruiser.
The Prado 150 and the 2010 and newer 4Runner with Kinetic suspension are not covered by the fitment above, so confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
Installation needs no cutting or drilling. The Kinetic sway bar position explains the lower bulge in the front panel, so the kit is built for vehicles with that layout.
What’s included
The skid panel system with its panels and hardware. Check the package contents against your installation before starting.







