Drivetrain & Differential
Showing 853–864 of 1036 resultsSorted by popularity
-
-
Ring and Pinion Installation Kits
G2 Dana 80 Master Ring and Pinion Installation Kit – 35-2080
- Master kit with bearings for the Dana 80 axle
- Not for use in 1999 up Ford Super Duty dually
- Includes Timken pinion bearings and carrier bearings, shims, nut, seal and crush sleeve
- Gear marking compound, thread locking compound and silicone sealer
SKU: G/235-2080 -
Ring and Pinion Installation Kits
G2 GM 8.5 Inch Front Master Ring and Pinion Installation Kit – 35-2021F
Ring and Pinion Installation KitsG2 GM 8.5 Inch Front Master Ring and Pinion Installation Kit – 35-2021F
- Master kit with bearings for the GM 8.5-inch (10 bolt) axle, front
- For use in 77-91 8.5-inch front axles only
- Includes Timken pinion bearings and carrier bearings, shims, nut, seal and crush sleeve
- Gear marking compound, thread locking compound and silicone sealer
SKU: G/235-2021F -
Ring and Pinion Installation Kits
G2 Ford 9.75 Inch 2000 Later Master Ring and Pinion Installation Kit – 35-2012A
Ring and Pinion Installation KitsG2 Ford 9.75 Inch 2000 Later Master Ring and Pinion Installation Kit – 35-2012A
- Master kit with bearings for the Ford 9.75-inch axle, rear
- For use in 2000 and newer axles only
- Includes Timken pinion bearings and carrier bearings, shims, nut, seal and crush sleeve
- Gear marking compound, thread locking compound and silicone sealer
SKU: G/235-2012A -
Ring and Pinion Installation Kits
G2 Dana 44 JK Rubicon Rear Master Ring and Pinion Installation Kit – 35-2052
Ring and Pinion Installation KitsG2 Dana 44 JK Rubicon Rear Master Ring and Pinion Installation Kit – 35-2052
- Master ring and pinion installation kit for the rear Dana 44 on Jeep JK Rubicon, part number 35-2052
- Includes Timken pinion bearings and carrier bearings with races
- Made for JK Rubicon rears with a factory locker
- Covers Wrangler JK, 2007–2018
SKU: G/235-2052 -
Ring and Pinion Installation Kits
G2 Toyota 7.5 Inch Tacoma Front Master Ring and Pinion Installation Kit – 35-2055
Ring and Pinion Installation KitsG2 Toyota 7.5 Inch Tacoma Front Master Ring and Pinion Installation Kit – 35-2055
- Master kit with bearings for the Toyota 7.5-inch IFS (Tacoma) axle, front
- For use in Toyota 7.5-inch IFS non clam shell front axle
- Includes Timken pinion bearings and carrier bearings, shims, nut, seal and crush sleeve
- Gear marking compound, thread locking compound and silicone sealer
SKU: G/235-2055 -
Ring and Pinion Installation Kits
G2 GM 12 Bolt Truck Master Ring and Pinion Installation Kit – 35-2018
Ring and Pinion Installation KitsG2 GM 12 Bolt Truck Master Ring and Pinion Installation Kit – 35-2018
- Master kit with bearings for the GM 12 bolt truck, 8.875-inch axle, rear
- Pinion and carrier bearings with shims, nut, seal and crush sleeve
- Includes Timken pinion bearings and carrier bearings, shims, nut, seal and crush sleeve
- Gear marking compound, thread locking compound and silicone sealer
SKU: G/235-2018 -
Ring and Pinion Installation Kits
G2 Ford 9 Inch 3.25 Inch Bore With Daytona Pinion Master Ring and Pinion Installation Kit – 35-2011C
Ring and Pinion Installation KitsG2 Ford 9 Inch 3.25 Inch Bore With Daytona Pinion Master Ring and Pinion Installation Kit – 35-2011C
- Master kit with bearings for the Ford 9-inch, 3.25-inch bore axle, rear
- For use with aftermarket 3.25-inch bore case
- Includes Timken pinion bearings and carrier bearings, shims, nut, seal and crush sleeve
- Gear marking compound, thread locking compound and silicone sealer
SKU: G/235-2011C -
Ring and Pinion Installation Kits
G2 Dana 44 JK Non Rubicon Rear Master Ring and Pinion Installation Kit – 35-2053
Ring and Pinion Installation KitsG2 Dana 44 JK Non Rubicon Rear Master Ring and Pinion Installation Kit – 35-2053
- Master ring and pinion installation kit for the rear Dana 44 on non-Rubicon Jeep Wrangler JK, part number 35-2053
- Includes Timken pinion bearings and races, and carrier bearings and races
- Pinion nut, pinion seal, crush sleeve, shims and ring gear bolts included
- Wrangler JK, 2007-2018, non-Rubicon rear Dana 44
SKU: G/235-2053 -
Ring and Pinion Installation Kits
G2 GM 8.5 Inch Big Bearing Master Ring and Pinion Installation Kit – 35-2021L
Ring and Pinion Installation KitsG2 GM 8.5 Inch Big Bearing Master Ring and Pinion Installation Kit – 35-2021L
- Master kit with bearings for the GM 8.5-inch big bearing (10 bolt) axle, rear
- For use in 81-98 8.5-inch rear axles with big bearing 8.6-inch differential carrier only
- Includes Timken pinion bearings and carrier bearings, shims, nut, seal and crush sleeve
- Gear marking compound, thread locking compound and silicone sealer
SKU: G/235-2021L -
Ring and Pinion Installation Kits
G2 GM 8.5 Inch Master Ring and Pinion Installation Kit – 35-2021
- Master kit with bearings for the GM 8.5-inch (10 bolt) axle, rear
- For use in 81-98 8.5-inch rear axles only
- Includes Timken pinion bearings and carrier bearings, shims, nut, seal and crush sleeve
- Gear marking compound, thread locking compound and silicone sealer
SKU: G/235-2021 -
Ring and Pinion Installation Kits
G2 Toyota 8 Inch 4 Cyl. Master Ring and Pinion Installation Kit – 35-2041
Ring and Pinion Installation KitsG2 Toyota 8 Inch 4 Cyl. Master Ring and Pinion Installation Kit – 35-2041
- Master kit with bearings for the Toyota 8-inch (4 cylinder) axle
- For use in 4 cylinder Toyota front and rear third members
- Includes Timken pinion bearings and carrier bearings, shims, nut, seal and crush sleeve
- Gear marking compound, thread locking compound and silicone sealer
SKU: G/235-2041
What belongs in the drivetrain
The drivetrain moves power from the crankshaft to the ground. On a typical 4x4 that means the clutch or torque converter, the transmission, the transfer case, front and rear driveshafts, and the axle assemblies with their differentials, gears, bearings and seals. The subcategories here separate those systems so you can narrow down to complete axles and third members, performance axle components, OEM-style replacement axle parts, drive shafts, shifters or transfer case upgrades.
Identify the axle before you shop
Most axle parts are specific to the axle model, spline count and sometimes the production year. Product titles in this category refer to Dana 30, Dana 35, Dana 44, Dana 80 and AMC Model 20 housings, among others. Read the data tag on the differential housing or pull the cover and count ring gear bolts and measure the ring gear diameter. A part labeled for a Dana 44 front axle will not necessarily fit a Dana 44 rear axle, so note the axle location as well as the model.
Gear ratio and differential type
- Ring and pinion ratio: a numerically higher ratio such as 4.56 or 5.38 multiplies torque more and helps larger tires turn freely, at the cost of higher engine speed on the highway.
- Matched sets: ring and pinion gears are lapped and used as a pair, and front and rear ratios must match on a four-wheel-drive vehicle.
- Open, limited-slip and locking differentials: each handles traction differently, and clutch-type limited-slip units use clutch packs and friction additives that wear over time.
Installation and setup
Gear installation depends on correct pinion depth, backlash and bearing preload. These adjustments need dial indicators, marking compound and patience, and a mistake can destroy a new gear set within a few miles. Many owners hand this work to a driveline shop. Replace crush sleeves, seals and gaskets whenever the assembly is opened, and use the gear oil grade and capacity the axle manufacturer specifies. Torque fasteners to published values.
Confirming compatibility
Always confirm fitment for your exact year, make and model, and compare the part number against the manufacturer's specifications. Spline count, axle shaft diameter, bolt pattern and housing casting numbers all matter, and cross-referencing them avoids returning the wrong part after a weekend teardown.
Maintenance habits matter as much as the parts you choose. Check axle breather tubes so they are not clogged or collapsed, since a blocked breather builds pressure and pushes oil past the seals. Inspect universal joints and slip yokes for play, grease them if they have fittings, and look at the driveshaft angles after any lift or suspension change. Vibration at a particular speed often points to a driveshaft that is out of balance or running at too steep an angle. Gear oil that looks milky has taken on water, and metallic glitter on a magnetic drain plug is a sign that something inside deserves a closer look before it fails on the trail. Keep a record of the ratio, axle model and spline count for each axle so future orders are straightforward.
When budgeting a drivetrain project, remember the supporting parts. Bearings, seals, shims, carrier hardware and fluids are all needed alongside gears, and skipping them to save a little money tends to cost more later. If you are unsure which items belong together, a driveline specialist can review your list.
Popular Drivetrain & Differential brands
- G2 Axle and Gear (320)
- Dana Spicer (127)
- Crown Automotive (115)
- Omix-Ada (63)
- Moog (59)
- Centerforce (44)
- Trail Gear (39)
- ARB 4x4 Accessories (33)
- Alloy USA (26)
- Jeep (21)
- Eaton (16)
- TeraFlex (15)
Shop Drivetrain & Differential by type
- Performance Axle Components (669)
- Drive Shafts & Drive Shaft Components (78)
- OEM Replacement Axle Parts (93)
- Complete Axles & Third Members (32)
- Clutch & Bellhousing Components (98)
- Automatic Transmissions (26)
- Shifters & Shifter Components (13)
- Transfer Cases and Replacement Parts (12)
- Transfer Case Upgrades & Crawl Boxes (7)
- Manual Transmissions Parts (5)
- Transmission and Transfer Case Mounts (6)
Drivetrain & Differential FAQ
How do I know which Dana axle I have?
Check the axle tag or stamped casting numbers on the housing, count the differential cover bolts, and look at the cover shape. Measuring the ring gear diameter after removing the cover gives a definitive answer. Confirm against the manufacturer's specifications for your year and model.
Do I need to change both axle gear ratios at once?
On a part-time or full-time four-wheel-drive vehicle, yes. Front and rear ratios must match, because mismatched ratios make the axles fight each other and can damage the transfer case and gears. Regear both axles together with the same ratio.
Is a ring and pinion set something I can install at home?
It is possible, but setting pinion depth, backlash and bearing preload takes special tools and experience. Errors cause noise and rapid wear. Many owners use a driveline shop, especially for the first gear swap.
What fluids should I replace when I work on the drivetrain?
Replace gear oil in any axle you open, plus transmission and transfer case fluid if they are involved. Use the viscosity and friction modifier requirements specified for your axle, and replace seals and gaskets while the parts are apart.

