Shock boots keep grit and water off a lifted shock's shaft and seal. How to size, vent and inspect one, when it can trap…
Shock Absorbers
Showing 1681–1692 of 3453 resultsSorted by popularity
-
Shock Absorbers
Icon Suspension V.S. 2.5 Series Piggyback Front Shocks – 67710P
- Icon Suspension 67710P V.S. 2.5 Series piggyback front shock kit
- Fitment list: 2005–2017 Ford F-250 and F-350 Super Duty
- Internal Bump Zone in the 6061 aluminum manifold adds 20% damping force.
- Gas charged, sold as a pair with all required hardware
SKU: ICO67710P -
Shock Absorbers
Icon Suspension V.S. 2.5 Series Piggyback Rear Shocks – 67700P
- Icon Suspension 67700P V.S. 2.5 Series piggyback shock kit, sold as a pair
- Fitment list: 2005–2017 Ford F-250 and F-350 Super Duty
- 6061 billet aluminum manifold creates an internal Bump Zone that Icon says adds 20% damping force
- Confirm the front or rear position before installing.
SKU: ICO67700P -
Shock Absorbers
Icon Suspension 4.5 Inch Front 2.5 Smooth Body Shocks – 67610P
- Icon Suspension 67610P 4.5-inch front 2.5 smooth body shock kit
- Core years are 2008 to 2010 Ford F250 and F350; the wider Super Duty range covers 2005–2017.
- Gas charged 2.5-inch diameter shocks with all required hardware
- Sold as a pair
SKU: ICO67610P -
Shock Absorbers
7 Inch Lift Front Shock 2.0 Aluminum Series
- Icon Suspension 66514 front shock for a 7 inch lift, 2.0 Aluminum Series
- Nitrogen charged monotube with internal reservoir and one piece piston
- Fits 2005–2017 Ford F-250 and F-350 Super Duty
- 6061 aluminum rod end and 6063 anodized aluminum body
- 100% rebuildable and 100% revalveable
SKU: ICO66514 -
Shock Absorbers
2.5 Inch Lift Remote Reservoir Front Shock 2.0 Aluminum Series
- Front remote reservoir shock for 2005-2017 Ford F-250 and F-350 Super Duty 4WD trucks
- Designed for a 2.5 inch lift
- One piece linear/digressive piston and 5/8 inch polished nitro steel shaft
- 100% rebuildable and 100% revalveable
SKU: ICO66512R -
Shock Absorbers
Icon Suspension V.S. 2.0 Aluminum Series Front Shock – 66512
- Front shock for 2.5 inch of lift on Ford Super Duty trucks
- Fits the 2005 to 2017 Ford F-250 and F-350 Super Duty
- Nitrogen charged monotube design with internal reservoir
- 100% rebuildable and revalveable, sold individually
SKU: ICO66512 -
Shock Absorbers
Icon Suspension V.S. 2.5 Series Remote Reservoir Coilover Shock Kit with CDCV – 58760C
Shock AbsorbersIcon Suspension V.S. 2.5 Series Remote Reservoir Coilover Shock Kit with CDCV – 58760C
- Front 2.5 inch remote reservoir coilover shocks for the Toyota Land Cruiser 200 Series
- Fits the 2008 to 2011 and 2013 to 2017 Toyota Land Cruiser (Base)
- Adjustable 0 to 3 inch lift height with ICON CDCV tuning
- 100% bolt-on with no drilling, cutting or welding
SKU: ICO58760C -
Shock Absorbers
Extended Travel Remote Reservoir Front Coilover Shock Kit
- Fits the 2010 to 2017 Toyota 4Runner and 2010 to 2014 Toyota FJ Cruiser (Base trim).
- Front extended travel remote reservoir coilover shock kit, 0 to 3 inch ride height
- Includes sway bar relocation brackets and reservoir mounting brackets
- Billet aluminum upper mount and 250 PSI nitrogen-charged internal reservoir
SKU: ICO58747 -
Shock Absorbers
Icon Suspension 0 – 3 Inch Front Extended Travel Remote Reservoir Shock Kit – 58745
- Fits the 2003 to 2009 Toyota 4Runner and 2007 to 2014 Toyota FJ Cruiser
- Front extended travel remote reservoir shock kit with 0 to 3 inch ride height
- Includes front coilovers, sway bar relocation brackets and all hardware
- Recommended tire size 285/75R16 with 16X8 wheels
SKU: ICO58745 -
Shock Absorbers
V.S. Series 2.5” Remote Reservoir Coilover Shocks
- Fits the 2005 to 2015 Toyota Tacoma
- 2.5 inch remote reservoir coilover shock, sold as a pair
- 0 to 3.5 inch adjustable lift height
- ICON CDCV valve with 10 adjustment settings
- 6061 aircraft grade aluminum components, made in the USA
SKU: ICO58735C -
Shock Absorbers
Icon Suspension 6 – 7 Inch Front 2.5 VS Coilover Shock Kit – 58651-CB
- Fits the 2007 to 2015 Toyota Tacoma
- Icon Suspension 58651-CB 2.5 VS Series front coilover shock kit for a 6 to 7 inch lift
- Built to replace Pro Comp 6 inch shocks
- Includes front coilovers and all required hardware
- Gas charged, sold as a pair
SKU: ICO58651-CB -
Shock Absorbers
Icon Suspension 0 – 3.5 Inch Front Extended Travel Coilover Shock Kit – 58645
- Fits the 2003–2009 Toyota 4Runner and 2007–2009 Toyota FJ Cruiser in the specified trims.
- 3.5 inch extended travel front coilover shock kit
- Front coilovers included with all required hardware
- Meant to be installed with an aftermarket uniball upper control arm kit
SKU: ICO58645
What a shock absorber does
A shock absorber is a damper. The spring holds the vehicle up, and the shock controls how fast that spring moves. Without working dampers a truck bounces repeatedly after every bump, tires lose contact with the ground, and braking and steering suffer. Off-road, shocks also absorb heat from constant motion, which is why fade becomes a concern on long, rough stretches.
Key specifications to compare
- Collapsed and extended length: These two numbers set the travel (extended minus collapsed). The shock must be long enough that it never limits suspension travel or bottoms out before the bump stops do, and short enough that it is not the first thing to run out at full droop.
- Mounts: Bar pin, stem, eyelet and bolt-in ends are not interchangeable without hardware. Match both the upper and lower mount styles to your vehicle.
- Body design: Monotube shocks usually run cooler and resist foaming better. Twin-tube shocks are common as stock replacements and are often quieter and lower in cost. Many listings state the body diameter, such as a 46mm smooth body.
- Reservoir: An external reservoir adds oil volume and gas capacity, which helps with heat in hard or sustained use.
- Shaft diameter: A larger shaft is generally more resistant to bending.
Choosing for your use
For a daily driver with a modest lift, a quality non-adjustable monotube or gas-charged twin-tube shock sized for your lift height is usually enough. If you tow, carry a heavy bumper and winch, or run fast desert roads, look at larger bodies, reservoirs and tunable valving. Pair the shock with the right spring rate; a shock cannot make up for a spring that is too soft or too stiff for the load.
Fitment and installation
Shocks are specific to lift height, axle and whether they are front or rear, so confirm fitment for your exact year, make and model and check the manufacturer's specifications. Replace shocks in axle sets, since one new and one worn shock gives uneven handling. Support the axle before removal so it cannot droop and stretch brake lines, and tighten fasteners to the specified torque. If you changed ride height, have the alignment checked afterward.
A final point on tuning: if a shock offers adjustable damping, change one setting at a time and note the result on a familiar road. Heavier loads, such as a winch bumper, roof tent or camping gear, often call for firmer valving than an empty truck. Inspect boots, bushings and mounting hardware at every oil change, since a worn bushing can mimic a failing shock.
Mistakes to avoid
The most common error is choosing shocks by brand or price without checking the length numbers. A shock that is too short lets the axle droop until the springs unseat or brake lines tighten, while one that is too long bottoms out and can bend the shaft or damage the mounts. Measure from mount to mount at ride height, then at full droop and full compression, and compare with the listed collapsed and extended lengths.
- Do not ignore worn bushings, since new shocks with tired bushings still clunk.
- Do not use a shock as a travel limiter; bump stops and limit straps do that job.
- Do not install shocks with the vehicle hanging from the frame and the springs unloaded, because mounts then sit in the wrong position.
Test drive on a familiar road after installation and listen for rattles before heading onto the trail.
Related guides
- Shock Boots: Why Every Lifted Shock Needs One
- Jeep JK Lift Heights: 2.5 vs 3.5 vs 4.5 Inch Compared
Jeep JK lift heights compared: the tires 2.5, 3.5 and 4.5-inch lifts clear, the track bars, arms, lines and driveshafts each needs, and which…
- Twin-Tube, Monotube or Reservoir: Picking the Right Shock
Twin-tube, monotube and reservoir shocks compared: how each handles heat, how to size one for your lift, and which design fits how you drive.
- Bilstein 5100 vs Fox 2.0 Performance: Which Shock for Your Lifted Truck or Jeep
Bilstein 5100 vs Fox 2.0 Performance: body, shaft, reservoir, travel and lift ratings across 417 part numbers, which trucks and Jeeps both fit, how…
Popular Shock Absorbers brands
- Pro Comp Suspension (898)
- Bilstein (615)
- Rancho (567)
- Fox Racing Shox (345)
- Skyjacker (279)
- Fabtech (232)
- ARB 4x4 Accessories (136)
- FOX (85)
- ICON Vehicle Dynamics (84)
- Rubicon Express (78)
- Icon Suspension (77)
- King Shocks (71)
Shock Absorbers FAQ
How do I know when shocks are worn out?
Common signs are oil leaking down the body, a bouncy or floaty ride, nose dive under braking, uneven tire wear and clunking from the mounts. A worn shock may also feel hot or weak when you compare it with a new one.
What is the difference between monotube and twin-tube shocks?
A monotube has a single working chamber with a floating piston separating oil and gas, which tends to shed heat well. A twin-tube uses an inner and outer tube and is common in factory-style replacements. Both can work well when matched to the vehicle.
Do I need new shocks after a lift?
Usually yes. A lift changes the distance between the mounts, so stock shocks may limit travel or bottom out. Choose shocks whose collapsed and extended lengths suit your lift height, and confirm the specifications with the manufacturer.
Should shocks be replaced in pairs?
Yes, replace both shocks on an axle together. Mixing new and worn dampers makes the two sides react differently, which affects handling and braking stability, especially on rough surfaces.




