Overview
The Icon Suspension 36510 is an 8 -12.5 in. lift 2.0 Aluminum Series monotube shock, sold individually, for Super Duty or Excursion applications. The position is shown as both front and rear, so confirm which one you need before installing.
Icon valves this shock for the ride quality of a Super Duty or Excursion. It is a gas-charged monotube design, and all required hardware is included.
Key features
- 2.0 Aluminum Series body in a monotube, gas-charged design
- Designed for an 8 -12.5 in. lift range
- Valved by Icon for Super Duty or Excursion ride quality
- All required hardware included
- Sold individually, one shock per unit
Choosing a lift height
Monotube shocks keep the gas charge and working oil in one tube, which tends to keep damping steady over long grades and rough roads. On a heavy truck with a lift, the shock works with the spring and control arms to manage the extra travel, so the lift height and the shock length should be chosen together rather than separately. Confirm whether the upper and lower mounts match the existing geometry before purchase.
Gas-charged shocks should be inspected for leaks at the seals and for a body that feels hot or noisy after use. Bump stops, control arm bushings and sway bar links are often replaced at the same time as the shocks on a lifted truck, because worn parts shift the load onto the new shock. Keep the shocks upright during storage and avoid striking the body during installation.
Specifications
| Brand | Icon Suspension |
|---|---|
| Part number | 36510 |
| UPC | 70000413227 |
| Series | 2.0 Aluminum Series |
| Shock type | Monotube, gas charged |
| Lift range | 8 -12.5 in. |
| Position | |
| Sold | Individually |
Vehicle fitment
No vehicles are confirmed for this shock, and no years, models or chassis codes are included. It is intended for Super Duty and Excursion applications, so confirm fit for your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The 8 -12.5 in. lift range means the shock length must match your lift height. Since the position is marked both front and rear, confirm which position you need before installing. Gas-charged monotube shocks are pressurized, so keep the gas chamber sealed during handling.
What’s included
All required hardware is included, and the shock is sold individually. Confirm the exact hardware contents against your installation before starting.



