Overview
The Fox Racing Shox 980-02-039 is a 2.0 Series emulsion shock with a remote reservoir and 11.0 inches of travel. It has a 1/2 inch bolt or heim mount and is a universal fit shock, so no vehicle, year or chassis is named for it.
The shock has a 2.0 inch body and a 5/8 inch shaft, and its remote reservoir is listed at 2.0 by 11.00 inches. It measures 17.10 inches collapsed and 28.10 inches extended, in a black and zinc finish.
Key features
- Emulsion design paired with a remote reservoir
- Choice of 1/2 inch bolt or heim mounting
- Black and zinc finish
- Valving can be matched to a vehicle’s driving needs.
Heim joints and bolt mounts
Heim joints are spherical bearings that let the shock move through several angles, while bolt mounts rely on a fixed pin or bushing. Both styles depend on clean hardware and correct alignment. A joint that binds or wears unevenly changes the shock’s working angle and loads the mounts harder than intended.
Choose hardware that matches the mount size and is rated for the load the shock will carry. Grease heim joints when they have fittings, and replace any joint with play, cracks or torn seals. Remote reservoir designs add a second body to route, so keep the hose and reservoir clear of the joints.
- Check heim joints for radial play
- Keep grit out of bolt holes and bushings
- Replace worn pins before they wear out of round
- Tighten mounting hardware after the first few trail runs
Specifications
| Brand | Fox Racing Shox |
|---|---|
| Part number | 980-02-039 |
| UPC | 70000375551 |
| Body diameter | 2.0 in. |
| Reservoir size | 2.0 x 11.00 in. |
| Travel | 11.0 in. |
| Shaft | 5/8 in. diameter |
| Extended length | 28.10 in. |
| Collapsed length | 17.10 in. |
| Mounting | 1/2 in. bolt / heim |
| Finish | Black and zinc |
Vehicle fitment
No vehicle is named for this shock, so fitment is not confirmed. Compare the 17.10 inch collapsed and 28.10 inch extended lengths with your current shock before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Heim and bolt mounts need matching 1/2 inch hardware, so check the mount type on your vehicle before fitting this shock.
What’s included
One shock with remote reservoir. No other hardware is listed.






