Overview
The Icon Suspension 66513 is a rear 2.0 Aluminum Series shock absorber with a 4.5 in. lift, from ICON Suspension’s Vehicle Specific (V.S.) line. It is a monotube, gas charged shock that ICON positions as a cost effective upgrade for everyday street driving and weekend off-road use.
The shock can be rebuilt and revalved, so its damping can be serviced or tuned over its life. Confirm the year, make and model against your vehicle before choosing it.
Key features
- Rear shock in the 2.0 Aluminum Series
- 4.5 in. lift
- Monotube, gas charged design
- Rebuildable and revalveable
- All required hardware included
Matching lift and ride height
A rear shock works with the springs, bump stops and axle to control how the truck settles under load and how it recovers after landing. When a lift raises the rear, the shock operates at a different extension, so its length and mounting points need to match the new ride height. Measure the current rear height before choosing a lift range.
Monotube gas charged shocks handle heat well during repeated use because the gas and oil share one tube, which helps keep damping consistent on long descents. Rebuildable designs can be serviced with new seals and valving when the original wears out. When replacing rear shocks, many owners also check leaf pack or coil condition, bump stops and sway bar links, since worn parts change how the new shock works.
- Check the shock shaft for bends and scoring
- Inspect rear bushings for cracks
- Replace rear shocks in pairs
- Recheck ride height after the first few drives
Specifications
| Brand | ICON Suspension |
|---|---|
| UPC | 70000677264 |
| Position | Rear |
| Shock series | 2.0 Aluminum Series |
| Design | Monotube |
| Charge | Gas charged |
| Lift | 4.5 in. |
Vehicle fitment
It is sold as a Vehicle Specific shock. Confirm the year, make and model against your vehicle before ordering.
Measure your rear suspension height and compare it with the 4.5 in. lift before ordering. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Match the 4.5 in. lift to your current rear suspension height before installing. Have a qualified installer check the rear mounting and ride height.
What’s included
All required hardware is included. Each unit is one rear shock.
