Overview
The Daystar Scorpion Shock Absorber, part number KU01003, is a twin-tube hydraulic shock with polyurethane bushings and black boots, made by Daystar for suspension upgrades. Each Scorpion is valved for its specific application, and the front version is for a 2 in. lift setup.
The twin-tube body adds oil capacity and resists shock fade. Inside, a durable piston seal and a velocity-sensitive valving stack work with a chrome-hardened piston shaft that supports longevity.
Key features
- Twin-tube hydraulic design that Daystar says increases oil capacity and reduces shock fade
- Velocity-sensitive valving stack, tuned for the specific application
- Chrome-hardened piston shaft
- Durable piston seal
- Polyurethane shock bushings
- Black shock boots
- White finish
Before you buy
A twin-tube shock keeps a separate reserve chamber alongside the working cylinder, so oil has room to move during long compression strokes. That design helps the damper stay consistent on rough trails and over repeated bumps, which is one reason twin-tube units are common on trucks that see both highway and dirt use. Valving matters as much as the body: a stiffer setup suits heavier loads and larger tires, while a softer setup feels better on daily pavement.
When you replace shocks, inspect the old units for oil seepage around the shaft, torn boots and bushings that have cracked or flattened. Worn bushings can make the ride feel loose and can shift alignment over time. If one shock is leaking, replacing it alone may leave the other side behind, so compare both shocks on each axle before deciding.
Specifications
| Brand | Daystar |
|---|---|
| Part number | KU01003 |
| UPC | 814423019101 |
| Shock type | Twin-tube hydraulic |
| Finish | White |
| Lift | Front w/ 2 in. lift |
| Bushings | Polyurethane |
| Boots | Black |
| Piston shaft | Chrome hardened |
Vehicle fitment
No vehicles are confirmed for this shock, and no years, models or chassis codes are included. Confirm fit for your vehicle’s year, model and trim, and your lift height, before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Match the front version to a 2 in. lift setup. Shocks valved for one application should not be swapped onto different vehicles or lift heights.
What’s included
The shock comes with a polyurethane bushing and black boots. Quantity and mounting hardware are not confirmed, so check the package contents against your installation before starting.








