Shock boots keep grit and water off a lifted shock's shaft and seal. How to size, vent and inspect one, when it can trap…
Shock Absorbers
Showing 1645–1656 of 3453 resultsSorted by popularity
-
Shock Absorbers
King Shocks Performance Series Shock Kit – 25001-180
- Fits 2007 to 2017 Jeep Wrangler JK, 2 and 4-door models
- Front shocks, sold as a pair
- Built for 0-2 inch lift kits (attribute line reads 0-2.5 in)
- Gas charged with remote reservoirs
- Aeroquip high pressure hoses and 6063 aluminum alloy reservoirs
SKU: KST25001-180 -
Shock Absorbers
King Shocks 2.5 Series Wide Range Compression Adjuster Shock Kit – 25001-177A
- Fits 2004 to 2006 Jeep Wrangler LJ and 1997 to 2006 Jeep Wrangler TJ
- Adjustable rear shocks with a billet compression knob
- 20 positive clicks of compression adjustment
- Large diameter micro-polished shafts
- Sold as a pair
SKU: KST25001-177A -
-
Shock Absorbers
2.5″ OEM Performance Piggyback Reservoir Shock Absorbers
- Fits 2005 to 2017 Ford F-250 and F-350 Super Duty
- Rear driver and passenger side, sold as a pair (quantity 2)
- 2.5 in body diameter with piggyback reservoir
- Compressed length 18.346 in, extended length 28.097 in
- Adjustable compression damping in a monotube design
SKU: KST25001-171A -
Shock Absorbers
King Shocks OEM Performance Series Rear Shocks – 25001-171
- King Shocks OEM Performance Series 25001-171, a rear gas-charged piggyback shock pair
- Fits 2005–2010 Ford F-250 and F-350 Super Duty trucks
- 2.5-inch shock body with external reservoir
- Rear kits allow a 15% travel increase.
- Sold as a pair, bolt-on with no cutting or welding
SKU: KST25001-171 -
Shock Absorbers
King Shocks Performance Series Shock Kit – 25001-161
- Rear performance shock kit for the 1997–2006 Jeep Wrangler TJ, per the manufacturer fitment list
- Designed for vehicles with 0 to 2 inch lift kits, sold as a pair
- Large diameter micro-polished shafts
- Aeroquip high pressure hoses on remote reservoirs
SKU: KST25001-161 -
Shock Absorbers
King Shocks Performance Series Shock Kit – 25001-160
- Front performance shock kit for 1997–2006 Jeep Wrangler TJ, per the manufacturer fitment list
- Designed for 0 to 2 inch lift kits, sold as a pair
- Large diameter micro-polished shafts
- Aeroquip high pressure hoses on remote reservoirs with 6063 aluminum alloy reservoirs
SKU: KST25001-160 -
Shock Absorbers
2.5″ OEM Performance Piggyback Reservoir Shock Absorbers
- Rear piggyback reservoir shock for 1996–2004 Toyota Tacoma
- Compressed length 13.11 inch, extended length 19.50 inch (left) and 20.50 inch (right)
- 2.5 inch body, non-adjustable, monotube design
- Sold as a pair, quantity 2 per pack
SKU: KST25001-153 -
Shock Absorbers
King Shocks OEM Performance Coilover Shock Kit for 0 Inch -3.5 Inch Lift Kits – 25001-151
Shock AbsorbersKing Shocks OEM Performance Coilover Shock Kit for 0 Inch -3.5 Inch Lift Kits – 25001-151
- Fits 1996 to 2004 Toyota Tacoma per King Shocks’ fitment list
- Front OEM Performance coilover shock kit, part number 25001-151
- Gas charged shocks with 2.5 inch diameter bodies
- Adjustable ride height and 25% more front wheel travel.
- Includes brackets, hardware and detailed instructions
SKU: KST25001-151 -
Shock Absorbers
2.5″ OEM Performance Coilover Conversion Shock Absorbers
- King Shocks 25001-146A front coilover conversion shock absorber, 2.5 inch
- Fits 2005 to 2017 Ford F-250 and F-350 Super Duty trucks in the trims covered.
- Monotube design with hard-anodized 6063 aluminum alloy and Rulon composite wear bands
- Pinch bolt coil adjuster nut
- Quantity: pair
SKU: KST25001-146A -
Shock Absorbers
King Shocks OEM Performance Series Front Coilovers – 25001-146
- King Shocks 25001-146 front coilover, OEM Performance Series with remote reservoir
- Fitment list covers 2005–2017 Ford F-250 and F-350 Super Duty
- A minor modification to the upper coil spring bucket is required
- Gas charged, direct fit, 0 in. lift/drop
- Quantity: pair
SKU: KST25001-146 -
Shock Absorbers
King Shocks OEM Performance Shock Kit for 0 Inch-3.5 Inch Lift Kits – 25001-144A
- Fits the 2014–2016 Toyota Tundra in the 1794 Edition, Limited, Platinum, SR, SR5 and TRD Pro trims
- Rear monotube shock, gas charged and adjustable
- Designed for 0 Inch-3.5 Inch lift kits and sold as a pair
- Part number 25001-144A from King Shocks
SKU: KST25001-144A
What a shock absorber does
A shock absorber is a damper. The spring holds the vehicle up, and the shock controls how fast that spring moves. Without working dampers a truck bounces repeatedly after every bump, tires lose contact with the ground, and braking and steering suffer. Off-road, shocks also absorb heat from constant motion, which is why fade becomes a concern on long, rough stretches.
Key specifications to compare
- Collapsed and extended length: These two numbers set the travel (extended minus collapsed). The shock must be long enough that it never limits suspension travel or bottoms out before the bump stops do, and short enough that it is not the first thing to run out at full droop.
- Mounts: Bar pin, stem, eyelet and bolt-in ends are not interchangeable without hardware. Match both the upper and lower mount styles to your vehicle.
- Body design: Monotube shocks usually run cooler and resist foaming better. Twin-tube shocks are common as stock replacements and are often quieter and lower in cost. Many listings state the body diameter, such as a 46mm smooth body.
- Reservoir: An external reservoir adds oil volume and gas capacity, which helps with heat in hard or sustained use.
- Shaft diameter: A larger shaft is generally more resistant to bending.
Choosing for your use
For a daily driver with a modest lift, a quality non-adjustable monotube or gas-charged twin-tube shock sized for your lift height is usually enough. If you tow, carry a heavy bumper and winch, or run fast desert roads, look at larger bodies, reservoirs and tunable valving. Pair the shock with the right spring rate; a shock cannot make up for a spring that is too soft or too stiff for the load.
Fitment and installation
Shocks are specific to lift height, axle and whether they are front or rear, so confirm fitment for your exact year, make and model and check the manufacturer's specifications. Replace shocks in axle sets, since one new and one worn shock gives uneven handling. Support the axle before removal so it cannot droop and stretch brake lines, and tighten fasteners to the specified torque. If you changed ride height, have the alignment checked afterward.
A final point on tuning: if a shock offers adjustable damping, change one setting at a time and note the result on a familiar road. Heavier loads, such as a winch bumper, roof tent or camping gear, often call for firmer valving than an empty truck. Inspect boots, bushings and mounting hardware at every oil change, since a worn bushing can mimic a failing shock.
Mistakes to avoid
The most common error is choosing shocks by brand or price without checking the length numbers. A shock that is too short lets the axle droop until the springs unseat or brake lines tighten, while one that is too long bottoms out and can bend the shaft or damage the mounts. Measure from mount to mount at ride height, then at full droop and full compression, and compare with the listed collapsed and extended lengths.
- Do not ignore worn bushings, since new shocks with tired bushings still clunk.
- Do not use a shock as a travel limiter; bump stops and limit straps do that job.
- Do not install shocks with the vehicle hanging from the frame and the springs unloaded, because mounts then sit in the wrong position.
Test drive on a familiar road after installation and listen for rattles before heading onto the trail.
Related guides
- Shock Boots: Why Every Lifted Shock Needs One
- Jeep JK Lift Heights: 2.5 vs 3.5 vs 4.5 Inch Compared
Jeep JK lift heights compared: the tires 2.5, 3.5 and 4.5-inch lifts clear, the track bars, arms, lines and driveshafts each needs, and which…
- Twin-Tube, Monotube or Reservoir: Picking the Right Shock
Twin-tube, monotube and reservoir shocks compared: how each handles heat, how to size one for your lift, and which design fits how you drive.
- Bilstein 5100 vs Fox 2.0 Performance: Which Shock for Your Lifted Truck or Jeep
Bilstein 5100 vs Fox 2.0 Performance: body, shaft, reservoir, travel and lift ratings across 417 part numbers, which trucks and Jeeps both fit, how…
Popular Shock Absorbers brands
- Pro Comp Suspension (898)
- Bilstein (615)
- Rancho (567)
- Fox Racing Shox (345)
- Skyjacker (279)
- Fabtech (232)
- ARB 4x4 Accessories (136)
- FOX (85)
- ICON Vehicle Dynamics (84)
- Rubicon Express (78)
- Icon Suspension (77)
- King Shocks (71)
Shock Absorbers FAQ
How do I know when shocks are worn out?
Common signs are oil leaking down the body, a bouncy or floaty ride, nose dive under braking, uneven tire wear and clunking from the mounts. A worn shock may also feel hot or weak when you compare it with a new one.
What is the difference between monotube and twin-tube shocks?
A monotube has a single working chamber with a floating piston separating oil and gas, which tends to shed heat well. A twin-tube uses an inner and outer tube and is common in factory-style replacements. Both can work well when matched to the vehicle.
Do I need new shocks after a lift?
Usually yes. A lift changes the distance between the mounts, so stock shocks may limit travel or bottom out. Choose shocks whose collapsed and extended lengths suit your lift height, and confirm the specifications with the manufacturer.
Should shocks be replaced in pairs?
Yes, replace both shocks on an axle together. Mixing new and worn dampers makes the two sides react differently, which affects handling and braking stability, especially on rough surfaces.














