Overview
The Icon Suspension 216522 is a rear shock from the 2.0 Aluminum Series, rated for a 0 -3 in. lift. It is a monotube, gas charged design that ICON Suspension offers as a Vehicle Specific (V.S.) upgrade for street and off-road performance.
The shock can be rebuilt and revalved, and it arrives with all required hardware. Confirm the year, make and model against your vehicle before choosing it, since the application decides the right lift range.
Key features
- Rear position, 2.0 Aluminum Series
- 0 -3 in. lift range
- Monotube, gas charged design
- Can be rebuilt and revalved for service
- All required hardware included
Rear shock service basics
The rear shock is where the truck’s load and bump energy are controlled, so worn units show up as bounce after dips, a floating feel on washboard roads, or fluid on the body. A monotube design puts the gas and oil in one tube, which helps the damping hold steady on long descents. Rear shocks are usually replaced in pairs so both sides damp the same way.
Service intervals depend on how the truck is used. A shock that runs in sand, mud or rock may need seals and valving checked sooner than one that mostly sees pavement. When a rebuild is planned, have a shop check the shaft, guide and piston band, and match valving to the truck’s weight and tire size. Keep the bolts and bushings in good condition, since loose or worn mounts reduce how well any shock works.
- Look for fluid seeping down the body
- Check the shaft for bends and nicks
- Replace worn rear bushings at the same time
Specifications
| Brand | ICON Suspension |
|---|---|
| UPC | 70000638424 |
| Position | Rear |
| Shock series | 2.0 Aluminum Series |
| Design | Monotube |
| Charge | Gas charged |
| Lift range | 0 -3 in. |
Vehicle fitment
This shock is sold as a Vehicle Specific unit. Confirm the year, make and model against your vehicle before ordering.
Compare the 0 -3 in. lift range with your vehicle’s rear suspension before choosing this shock. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Confirm the lift range fits your current rear suspension height before installing. A qualified installer should check the rear mounting points and ride height after the shock is fitted.
What’s included
All required hardware is included, and each unit is one rear shock.

