Overview
This Pro Comp Suspension product is a 5/8in rubber shock bushing. A shock bushing is a rubber sleeve that cushions the connection between a shock absorber and its mount.
The bushing is 5/8in in size and is made of rubber. Measure your shock mount and confirm the 5/8in size before ordering.
Shock bushings and wear
Shock bushings sit at the ends of a shock absorber and absorb small movements and vibration between the shock and its bracket. Rubber softens and cracks over time, especially where it is exposed to heat, road salt and grit, and a worn bushing can allow the shock to knock or move in its mount.
When replacing bushings, measure the bore and stud before ordering, and check whether the shock uses a sleeve or washer with the bushing. Replace bushings in sets so both ends of the shock wear evenly. After installation, check the shock for free movement and confirm it does not contact the body or suspension at full travel.
- Cracked or swollen rubber
- Knocking at the shock mount
- Bushing that spins or slides in its bore
- Shock that rests against a nearby part
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| UPC | 614901153774 |
| Product type | Shock bushing |
| 5/8in | 5/8in |
| Material | Rubber |
Vehicle fitment
Check that the bushing suits your shocks and mounts for your vehicle’s year, model and trim before ordering.
Installation notes
Support the vehicle on rated jack stands, replace bushings in sets, and tighten the shock mounting hardware to the specified torque. Recheck it after the first miles of driving.








