Overview
The FOX 985-24-050 is a 2.0 Performance Series smooth body remote reservoir shock with eyelet bushing mounts. The shock is gas charged and has an extended length of 18.95 inch and a collapsed length of 12.35 inch.
FOX builds its direct replacement shocks as bolt-on units tested by its engineers to maximize suspension travel and performance on and off the road, with applications ranging from stock to lifted.
Key features
- 2.0 Performance Series shock
- Smooth body design
- Remote reservoir
- Eyelet bushing mounts
- Gas charged
- Extended length 18.95 inch, collapsed length 12.35 inch
Choosing a replacement shock
A remote reservoir shock separates the gas reservoir from the damper body, which helps the shock keep its damping under heavy use. The reservoir hose needs room to move with the suspension and should stay clear of tires, brake lines and sharp edges. Shocks that work hard on rough terrain run hotter, so reservoir mounting is worth checking after long trips.
When choosing a replacement, compare mounting style, body length and stroke before anything else. Eyelet ends suit many bushing setups, but the bushing size must match the mount exactly. Shocks often wear in pairs, so a single replacement can leave the two sides handling differently.
- Measure the shock eye to eye when fully compressed and extended
- Match the mount style and bushing size at both ends
- Inspect the reservoir hose for chafing and leaks
- Replace worn bushings when the shock is serviced
Specifications
| Brand | Fox Racing Shox |
|---|---|
| Part number | 985-24-050 |
| UPC | 70000662349 |
| Product type | Remote reservoir shock absorber |
| Series | 2.0 Performance, 2.0 Shock Res |
| Body | Smooth body |
| Mounts | Eyelet bushing |
| Reservoir | Remote |
| Extended length | 18.95 inch |
| Collapsed length | 12.35 inch |
| Size listed in source | 2.0 x 6.5 |
| Hydraulic / gas charged | Gas charged |
Vehicle fitment
Compare the extended and collapsed lengths with your vehicle’s shock requirements before ordering.
Compare the 18.95 inch extended and 12.35 inch collapsed lengths against your shock mounting points before ordering.
Confirm fit for your vehicle’s year, model and trim before ordering, using the lengths above as a starting point.
Installation notes
Shocks control wheel movement and vehicle stability, so professional installation is the safer route. Support the vehicle on jack stands rather than a jack alone, and tighten mounting hardware to the correct torque for your vehicle.
Re-check the hardware after the first miles of driving. Replace shocks in axle pairs where the manufacturer advises it, and have the alignment and ride height checked after any suspension work.
What’s included
The shock comes as a single unit with eyelet bushings. Check the mounting hardware and reservoir fittings against your installation before starting.








