Leveling kit vs lift kit explained: factory rake, spacers and torsion keys, tire sizes at 2 to 3 inches, CV angles, towing, load leveling…
Lift Kits
Showing 289–300 of 1736 resultsSorted by popularity
-
Lift Kits
ReadyLift 3 Inch Front 1 Inch Rear SST Lift Kit – 69-1930
- 3-inch front and 1-inch rear lift for 2019 Ram 2500 4WD trucks
- Black e-coated laser cut steel coil spring spacers that keep the factory front coil springs
- Clearance for tires up to 37 inches tall
- Not for trucks with a factory snow plow or ambulance package
SKU: RDY69-1930 -
Lift Kits
ReadyLift 2.75 Inch SST Lift Kit – 69-5510
- 2.75-inch mild SST lift for 2005–2018 Toyota Tacoma Base, SR, SR5 and X-Runner models
- Steel Smart Strut Technology front strut spacers
- Rear add-a-leaf lift that allows a larger 31-inch diameter tire
- Lifetime guarantee against manufacturing defects
SKU: RDY69-5510 -
Lift Kits
ReadyLift 2.5″ Front Coil Spring Lift Kit with Bilstein Shocks – 46-2729
- ReadyLift 46-2729 2.5-inch front coil spring lift kit with Bilstein shocks
- Fits 2011–2016 Ford F-250 and F-350 Super Duty
- Bilstein 5100 series shocks at the front and rear
- Lift height range of 0 to 3.5 inches, with 35-inch tires easily accommodated
SKU: RDY46-2729 -
Lift Kits
ReadyLift 2.5 Inch SST Lift Kit – 69-6826
- 2.5-inch front and 2.0-inch rear SST coil spring spacer lift for Jeep Wrangler JL Sport and Sahara models
- Heavy-duty top mount coil spring spacers and shock extensions
- Bump stop extensions for maximum articulation
- Fits 35-inch tall tires on the Sahara and Sport versions
SKU: RDY69-6826 -
Lift Kits
ReadyLift 2.5 Inch SST Lift Kit – 69-6825
- 2.5-inch front and 2.0-inch rear SST coil spring spacer lift for 2018 and 2019 and 2021–2026 Jeep Wrangler JL Rubicon models
- Front and rear shock extensions with slight angle correction
- Bump stop extensions for flexing without tire contact
- Fits up to 37-inch tall tires on the Rubicon
SKU: RDY69-6825 -
Lift Kits
ReadyLift 2.5 Inch SST Lift Kit – 69-2755
- 2.5-inch front and rear billet aluminum lift for 2017–2020 Ford F-150 Raptor trucks
- Billet coil-over spacers that fit the factory Internal Bypass coil-overs
- Cast iron 4-inch rear lift blocks that replace the factory block
- Control arm bump stops that limit over-droop for off-road use
SKU: RDY69-2755 -
Lift Kits
ReadyLift 2.5 Inch SST Lift Kit – 69-2741
- 2.5-inch front and 2.0-inch rear SST lift for 2017–2021 Ford F-250 and 2017–2018 F-350 Super Duty SRW 4WD trucks
- Sway bar drop mount spacers and a track bar relocation bracket included
- Built for two-piece driveshaft trucks
- No cutting or drilling; lifetime warranty against manufacturing defects
SKU: RDY69-2741 -
Lift Kits
ReadyLift 2.5 Inch SST Lift Kit – 69-2524
- 2.5-inch front and 2.0-inch rear SST lift with a 4.0-inch OEM-style rear block for 2011–2016 Ford F-250 and F-350 Super Duty 4WD trucks
- Coil spring spacers, sound isolators, shock extensions and sway bar frame mount spacers
- Track bar relocation bracket and carrier bearing spacer
- Written for one-piece driveshaft F-250 trucks
SKU: RDY69-2524 -
Lift Kits
ReadyLift 2.5 Inch SST Lift Kit – 69-2511TP
- 2.5-inch front and 2-inch rear SST lift with a 5.0-inch OEM-style rear block, for 2011–2016 Ford F-250 and F-350 Super Duty 4WD trucks
- Includes sway bar mount spacers, shock extensions and a carrier bearing spacer
- Tires up to 35 inches; one-piece driveshaft trucks only
- No cutting or drilling required; lifetime warranty against manufacturing defects
SKU: RDY69-2511TP -
Lift Kits
ReadyLift 2.5 Inch SST Lift Kit – 69-1036
- 2.5-inch front and 1.5-inch rear SST lift for 2009–2018 Dodge and Ram 1500 4WD trucks
- Heavy duty DOM tube steel upper control arms with corrected ball joint cup angles
- Fits up to 35×11.50 tires on 9-inch wheels with +12 offset
- Bump stop extensions and one-time grease control arm bushings
SKU: RDY69-1036 -
Lift Kits
ReadyLift 2.5 Inch SST Lift Kit – 69-1035
- 2.5-inch SST mild lift for 2009–2012 Dodge Ram 1500 2WD trucks
- Front and rear lift with a slight rake kept for towing or hauling
- All-steel Smart Suspension Technology mounts that sit on the front and rear struts
- Designed for 35-inch tires; no urethane spacers to compress or deteriorate
SKU: RDY69-1035
What a lift kit includes
A lift kit is a bundle of parts that raises the body or frame relative to the axles. Listings in this category show how much the contents vary. Some kits are little more than spacers and bump stops, while others add replacement coil springs, extended sway bar links, track bar brackets, steering drop components and matched shocks.
Lift height is the headline number, but it is only part of the story. A kit sold as 3.5 inch, 4 inch or 6 inch describes nominal lift, and the actual change depends on the vehicle, tire size and how much it sags with weight.
Short arm, long arm and spacer designs
Design matters more than height. Common types you will see here:
- Spacer and strut kits raise the ride height cheaply and keep factory geometry, which suits moderate lifts.
- Short arm kits keep the factory control arm mounting points and replace springs, arms and shocks. They are simple to install and work well for daily drivers.
- Long arm and 4-link kits relocate the arm mounts with crossmembers, giving better articulation and a flatter arm angle at the cost of more complex installation.
- Radius arm and drop bracket kits are common on solid-axle trucks and corrected geometry varies by model.
Kits with a stage or number in the name usually add components step by step, so read the contents list rather than assuming two kits of the same height are equivalent.
Shocks and geometry correction
Raising a vehicle changes control arm angles, driveline angles and steering geometry. Good kits include correction parts such as caster-correcting bushings, cam bolts for pinion angle, drop brackets, a high steer or drag link, and extended brake lines. If a kit leaves these out, plan to buy them separately.
Shocks are either included or sold separately. Twin tube, monotube and reservoir shocks differ in heat handling and ride feel. Confirm the shock lengths suit the lift height, since a shock that is too short can limit travel and one that is too long can bottom the bump stops.
Installation and compatibility
Lift kits are vehicle specific. Confirm fitment for your exact year, make, model, cab or door configuration, drivetrain (2WD or 4WD) and engine, then compare against the manufacturer's specifications. Part numbers often change between model years.
Suspension, steering and brake line work is safety critical. Professional installation is a sound choice unless you have the tools and experience, and every fastener should be tightened to the specified torque with the vehicle at ride height. Plan on an alignment after the lift, plus a check of headlight aim, speedometer calibration if you change tire size, and driveshaft angles.
Lift height, bumper height and tire rules vary by state, so check local regulations.
Maintenance and common mistakes
A lifted suspension needs more attention than a stock one. Recheck every suspension bolt after the first 100 miles or so, because bushings settle and fasteners can lose torque. Grease any fittings on control arms and ball joints on the schedule the manufacturer gives, and inspect bump stops, shock mounts and brake lines at each oil change.
- Do not pick a lift height first and shop for parts second. Start with the tire size you want and the use you have in mind.
- Do not skip extended brake lines or a driveshaft check on taller lifts.
- Do not mix leftover parts from different kits, since spring rates and arm lengths are matched within a kit.
- Remember that a taller vehicle behaves differently in corners and in emergency maneuvers, so adjust your driving.
Related guides
- Leveling Kit vs Lift Kit: What 3 Inches Really Gets You
- The XJ Cherokee 4.5-Inch Lift: What a Complete Kit Needs
A complete XJ 4.5 lift needs coils, leaf springs, control arms, a track bar, shocks and brake lines. See the parts, axle limits and…
- Jeep JK Lift Heights: 2.5 vs 3.5 vs 4.5 Inch Compared
Jeep JK lift heights compared: the tires 2.5, 3.5 and 4.5-inch lifts clear, the track bars, arms, lines and driveshafts each needs, and which…
- Twin-Tube, Monotube or Reservoir: Picking the Right Shock
Twin-tube, monotube and reservoir shocks compared: how each handles heat, how to size one for your lift, and which design fits how you drive.
- Bilstein 5100 vs Fox 2.0 Performance: Which Shock for Your Lifted Truck or Jeep
Bilstein 5100 vs Fox 2.0 Performance: body, shaft, reservoir, travel and lift ratings across 417 part numbers, which trucks and Jeeps both fit, how…
Popular Lift Kits brands
- Pro Comp Suspension (613)
- Rubicon Express (338)
- Fabtech (162)
- Rough Country (98)
- Tuff Country (90)
- Skyjacker (80)
- TeraFlex (64)
- Daystar (62)
- ReadyLift (59)
- Trail Master (40)
- Genuine Packages (26)
- ARB 4x4 Accessories (24)
Lift Kits FAQ
How much lift do I need for 35 inch tires?
It depends on the vehicle, backspacing and trimming. Many solid-axle vehicles clear 35s with about 3.5 to 4 inches of lift plus some trimming, while independent front suspension trucks vary. Check the kit manufacturer's tire size guidance for your exact model.
Do I need an alignment after installing a lift kit?
Yes. Changing ride height alters caster, camber and toe, so an alignment is required after installation. Headlight aim and driveline angles should also be checked, and a high steer or geometry correction parts may be needed.
Is a long arm kit better than a short arm kit?
Long arm kits generally improve articulation and geometry at taller lifts but cost more and are harder to install. Short arm kits are simpler and fine for moderate lifts and mostly street use.
Will a lift kit affect my ride and fuel economy?
Usually yes. A taller, heavier setup raises the center of gravity and increases drag, and bigger tires add weight and rolling resistance. Quality shocks and correct alignment help the ride but cannot fully offset those changes.
















