Overview
The ReadyLift 69-6826 is a 2.5-inch front and 2.0-inch rear SST coil spring spacer lift kit for the Jeep Wrangler JL Sport and Sahara. It fits 2018 to 2019 and 2021 to 2026 Wrangler JL Sport two-door, Sport S two-door and Unlimited Sahara, Unlimited Sport and Unlimited Sport S four-door models. It is built for the JL’s solid axle layout.
The design applies coil spring spacer technology to the JL’s solid axle. Two heavy-duty front and two heavy-duty rear top mount coil spring spacers keep the factory coil springs in use. Front and rear shock extensions correct the shock angle for better performance. The kit is suited to 35-inch tall tires on the Sahara and Sport versions.
Key features
- 2.5 inches of front lift and 2.0 inches of rear lift
- Two heavy-duty top mount coil spring spacers at the front and two at the rear
- Front and rear shock extensions with slight angle correction
- Front and rear bump stop extensions for flex clearance
- Solid axle design suited to coil spring spacer lifts
- Fits 35-inch tall tires, per the body text
Choosing tires and clearance
Tire height is the factor that most changes how a coil spring spacer lift feels, because a taller tire adds rotating mass and changes the effective gearing. On the JL, a slightly larger tire can be fitted with a short lift, but the bump stops and fender edges must clear at full flex. Matching tire diameter to the lift and the rest of the drivetrain keeps speedometer readings and shift behavior predictable.
Spacers keep the factory coil springs, so those springs work at a different height. Springs that are worn or sagging will not sit where the spacers expect. Inspect the springs for cracks or sag, and check the top mounts for rust before installing new spacers. Tire pressure should be checked more often when tires are larger.
- Measure tire diameter before buying
- Check fender edges at full flex
- Inspect coil springs for cracking or sag
- Recheck tire pressure after each tire change
Specifications
| Brand | ReadyLift |
|---|---|
| Part number | RDY69-6826 |
| Front lift | 2.5 inches |
| Rear lift | 2.0 inches |
| Front and rear spacers | Heavy-duty top mount coil spring spacers |
| Shock extensions | Front and rear, with angle correction |
| Tire clearance | 35-inch tall tires, per the body text |
| Lift height range | 0 to 3.5 inches |
| Fitment type | Direct fit |
Vehicle fitment
It fits 2018 to 2019 and 2021 to 2026 Jeep Wrangler JL Sport two-door, Sport S two-door, Unlimited Sahara, Unlimited Sport and Unlimited Sport S models.
It does not fit the Rubicon, which has its own kit. The 2020 Wrangler JL is not covered. Make sure your vehicle’s year, model and trim are covered before buying.
Installation notes
Replacing the spring seats with top mount spacers and fitting shock extensions changes the suspension angles, so an alignment and a driveline angle check belong after installation. Check the bump stop extensions for clearance at full flex.
What’s included
The kit includes the front and rear heavy-duty top mount coil spring spacers, the front and rear shock extensions and the front and rear bump stop extensions.









