Overview
The ReadyLift 69-2741 is a 2.5-inch front and 2.0-inch rear SST Lift Kit for single rear wheel Ford Super Duty 4WD trucks. It fits 2017 to 2021 F-250 models and 2017 and 2018 F-350 models in the King Ranch, Lariat, Limited, Platinum, XL and XLT versions. It gives a slight rake for towing or hauling.
The 2.5-inch coil spacers and sound isolators are designed to keep the factory ride and quiet sound. Shock extensions keep the factory front shocks in use. Sway bar drop mount spacers position the sway bar correctly, bump stop extensions keep the factory bump stop distance, and a carrier bearing spacer adjusts driveshaft angle.
Key features
- 2.5 inches of front lift and 2.0 inches of rear lift
- Powder coated coil spring spacers with sound isolators
- Shock extensions for the factory front shocks
- Sway bar drop mount spacers
- Bump stop extensions that keep the factory bump stop distance
- Carrier bearing spacer for driveshaft angle
- Track bar relocation bracket included
Driveshaft and rear geometry
Two-piece driveshafts use a center bearing, and the angle at each joint matters for vibration. A carrier bearing spacer changes that geometry when the rear is raised, so the driveline should be checked for vibration at highway speed after installation. Worn u-joints or a loose center bearing show up quickly once the angle changes, so inspect them first.
Sway bar drop mount spacers move the bar to match the new ride height, and the bar links should move freely afterward. The track bar relocation bracket helps steering stay centered at the new height. Replacing worn tie rod ends and track bar bushings during the install avoids repeat work on the alignment later.
- Inspect the center bearing and u-joints for play
- Check sway bar links for free movement
- Confirm the steering damper and track bar bushings are sound
- Schedule an alignment immediately after the install
Specifications
| Brand | ReadyLift |
|---|---|
| Part number | RDY69-2741 |
| Front lift | 2.5 inches |
| Rear lift | 2.0 inches |
| Rear lift component | Block and U-bolt |
| Driveshaft | Two-piece driveshaft |
| Excluded trim | Tremor editions are not covered |
| Warranty | Lifetime against manufacturing defects |
| Fitment type | Direct fit |
Vehicle fitment
It fits 2017 to 2021 Ford F-250 Super Duty models and 2017 to 2018 F-350 Super Duty models in the King Ranch, Lariat, Limited, Platinum, XL and XLT versions.
Tremor editions are not covered. 2020 and 2021 trucks may sit slightly taller at the rear because of factory block height variations. Verify that your year, model and trim match before placing an order.
Installation notes
ReadyLift says installation requires no cutting or drilling. The carrier bearing spacer is used to set the driveshaft angle, and the track bar relocation bracket is included for steering quality. An alignment should be checked after installation.
What’s included
The kit includes the 2.5-inch coil spring spacers with sound isolators, shock extensions, sway bar drop mount spacers, bump stop extensions, the carrier bearing spacer, the track bar relocation bracket and the rear block and U-bolt parts.









