Overview
The ReadyLift 69-1930 is a 3-inch front and 1-inch rear SST lift kit for the 2019 Ram 2500 4WD. The front coil spacer is designed for the new body style Ram 2500 4WD HD trucks, and it gives 3 inches of lift with clearance for tires up to 37 inches tall. It fits Big Horn, Laramie, Laramie Longhorn, Limited, Lone Star, Power Wagon and Tradesman versions of the 2019 truck.
The front and rear coil spring spacers are made from black e-coated laser cut steel. The steel is designed to resist deterioration and hold ride height over time, and the front spacer keeps the factory front coil spring in use. The rear uses a 1-inch lift with a block and U-bolt method.
Key features
- 3-inch front lift
- 1-inch rear lift
- Black e-coated laser cut steel spacers
- Factory front coil spring retained
- Clearance for tires up to 37 inches tall
- Designed for the 2019 Ram 2500 body style
Checking equipment before ordering
Heavy-duty trucks often carry factory equipment that changes front and rear suspension loads. Snow plow packages and ambulance packages add weight and change how the front end sits, which is why they are excluded from this kit. Before ordering, check the window sticker or build sheet for factory package codes so the right part is selected for the truck.
A 1-inch rear lift with a block and U-bolts changes the driveline angle, so the driveline should be checked after installation. Front coil spring spacers keep the factory spring, which means the spring’s condition matters. Look for sag, cracks or rust on the factory springs, and check front tire clearance at full steering lock.
- Check the window sticker for factory equipment packages
- Inspect factory front coil springs for sag or cracks
- Check the driveline angle after the rear block is in
- Verify tire clearance at full steering lock
Specifications
| Brand | ReadyLift |
|---|---|
| Part number | RDY69-1930 |
| Front lift | 3 inches |
| Rear lift | 1 inch |
| Spacer material | Black e-coated laser cut steel |
| Rear lift method | Block and U-bolt |
| Tire clearance | Up to 37 inches tall |
| Drive type | 4WD |
| Fitment type | Direct fit |
Vehicle fitment
It fits 2019 Ram 2500 models in the Big Horn, Laramie, Laramie Longhorn, Limited, Lone Star, Power Wagon and Tradesman versions.
Power Wagon, trucks with a factory snow plow package and ambulance package trucks are not covered. Check equipment, year, model and trim against your truck before ordering.
Installation notes
The front spacer keeps the factory front coil spring and raises the front by 3 inches. The rear block and U-bolts change the rear height and the driveline angle, so the driveline should be checked after installation. A wheel alignment should follow any change to the front height.
What’s included
The kit includes the front coil spring spacers and the rear block and U-bolt components.










