Overview
The ReadyLift 69-1331 is a 3-inch SST lift kit for the 2013 to 2018 Dodge Ram 3500 4WD. It lifts the truck without changing the factory ride or handling, and its front coil spacers let the factory front coil springs stay in use. It fits Big Horn, Laramie, Laramie Limited, Laramie Longhorn, Limited, Lone Star, SLT, ST and Tradesman versions.
The front 3.0-inch spacers are black e-coated steel, a finish that resists deterioration and loss of ride height over time. The rear uses a block and U-bolt lift. The kit is sized for 35-inch tires.
Key features
- 3.0-inch front coil spring spacers in black e-coated steel
- Factory front coil springs retained
- Block and U-bolt rear lift
- Sized for 35-inch tires
- Lift kit size of 3 inches
Before you buy
A lift kit changes how the truck sits, and that affects more than the stance. Raising the front with spacers alters the height of the front axle relative to the body, which can change steering feel and the angle of the front driveline. Shoppers should think about the tires they plan to run, since larger diameters add load to the drivetrain and may need clearance checks at full steering lock.
Spacer-style front lifts keep the original coil springs, which suits a truck driven mostly on pavement. Heavy payloads and trailers can still sag the rear, so a rear block may be needed to keep the stance even. Anyone who tows often should weigh the rear geometry change against their typical cargo before settling on a height.
- Measure ride height before and after the install
- Plan for an alignment once the front is set
- Check brake hose and sensor length when the height changes
Specifications
| Brand | ReadyLift |
|---|---|
| Part number | RDY69-1331 |
| Lift kit size | 3 inches |
| Front spacer | 3.0-inch, black e-coated steel |
| Rear lift component | Block and U-bolt |
| Tire size | 35 inches |
| Drive type | Four-wheel drive (4WD) |
| Fitment type | Direct fit |
Vehicle fitment
It fits 2013 to 2018 Ram 3500 models in the Big Horn, Laramie, Laramie Limited, Laramie Longhorn, Limited, Lone Star, SLT, ST and Tradesman versions.
It is not made for model years 2012 and earlier or 2019 and later. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Front spacers change the front ride height without changing the spring itself, so the alignment should be checked after installation. The block and U-bolt rear lift changes the rear driveline angle, which should be checked once the rear is set.
What’s included
Check the package contents against your installation before starting.









