Overview
The ReadyLift 69-1035 is a 2.5-inch SST mild lift kit for 2009 to 2012 Dodge Ram 1500 2WD trucks. SST goes beyond a front leveling kit by lifting both ends while keeping a slight rake for towing or hauling. It fits the 2009 and 2010 Dodge Ram 1500 and the 2011 and 2012 Ram 1500 in several trim levels.
The Smart Suspension Technology mounts sit directly on top of both the front and rear struts. The kit is built from all steel, and steel parts do not compress the springs or break down over time the way urethane spacers can.
Key features
- 2.5-inch lift at the front, per the product name and lift kit size
- Rear spacer lift, with the rear kept at a slight rake
- All-steel construction
- Smart Suspension Technology mounts that fit on the top of the front and rear struts
- Tires up to 35 inches
- Lift height range of 0 to 3.5 inches
Before you buy
Lift kits that work at both ends change more than ride height. Raising the front and rear shifts the angles of the axles, driveline and steering linkage, so the truck should be checked after any height change. Confirm the drive type and trim before buying, and plan for a wheel alignment and a driveline inspection once the truck sits at its new height.
Steel spacer and mount designs hold their height under load, while urethane spacers can compress over time and lower the truck. Shocks are not included here, so check their length and condition with the new height in mind. Worn ball joints and bushings should be replaced before installing any lift, since added height puts more load on them.
Specifications
| Brand | ReadyLift |
|---|---|
| Part number | RDY69-1035 |
| Lift kit size | 2.5 inches |
| Lift height range | 0 to 3.5 inches |
| Rear lift component | Spacer |
| Construction | All steel |
| Tire size | 35 inches |
| Shocks | None included |
| Drive type | Built for 2WD drivetrains |
| Fitment type | Direct fit |
Vehicle fitment
It fits 2009 and 2010 Dodge Ram 1500 Laramie, SLT, ST, Sport, TRX and TRX4 models, and 2011 and 2012 Ram 1500 Big Horn, Express, Laramie, Laramie Longhorn, Outdoorsman, SLT, ST, Sport, Tradesman and Tradesman HD models.
Confirm the drive type of your truck before ordering. Model years 2013 and later are not covered by this kit. Check your vehicle’s year, model and trim before ordering.
Installation notes
The SST mounts change the height of both ends of the truck, so a wheel alignment belongs after installation. The rear spacer also changes the rear driveline angle, so check those angles once the truck is at its new height.
What’s included
The kit includes the front and rear SST mounts, which are all steel, and the rear spacer that provides the rear lift. Check the package contents against your installation before starting.
Not included: Shocks. None are included with this kit.









