Overview
The ReadyLift 69-5510 is a 2.75-inch mild SST lift kit for the 2005 to 2018 Toyota Tacoma with the five-lug bolt pattern. It works as a leveling and lift system and gives the Tacoma a modest increase in height. The kit fits Base, SR, SR5 and X-Runner versions of the Tacoma.
The kit uses Smart Strut Technology, which is a set of steel front strut spacers, along with a rear lifting add-a-leaf. The add-a-leaf allows a larger 31-inch diameter tire. Mild kits like this one offer a lower-cost way to change ride height and accommodate a larger tire.
Key features
- 2.75-inch mild SST lift
- Steel Smart Strut Technology front strut spacers
- Rear lifting add-a-leaf
- Allows a 31-inch diameter tire
- Five-lug bolt pattern application
- Lifetime guarantee against manufacturing defects
Strut spacers and ride height
Front strut spacers raise the front without changing the spring, which keeps the stock front springs in place. Because the front height changes, caster and toe settings usually need checking, so a wheel alignment should follow the install. The rear add-a-leaf adds support at the back, and a truck that sits level after the change carries loads more evenly.
Trucks on this platform often see heavy use on trails and in towing, which wears front steering and suspension parts faster. Tie rod ends, ball joints and control arm bushings should be inspected before a lift to avoid early failure. Keep an eye on the rear add-a-leaf for cracking or sag over time.
- Inspect tie rod ends and ball joints before installing
- Check the front alignment after the strut spacers are fitted
- Look for cracks or sag in the rear add-a-leaf
- Re-torque strut fasteners after the first few drives
Specifications
| Brand | ReadyLift |
|---|---|
| Part number | RDY69-5510 |
| Lift size | 2.75 inches, per the product name |
| Lift height range | 0 to 3.5 inches |
| Front component | Steel strut spacer |
| Rear lift component | Add-a-leaf |
| Tire size | 31-inch diameter |
| Shocks | None included |
| Fitment type | Direct fit |
Vehicle fitment
It fits 2005 to 2018 Toyota Tacoma models in the Base, SR, SR5 and X-Runner versions.
The kit is for the five-lug 2WD Tacoma. Confirm drive type and bolt pattern before ordering. The 2019 and later Tacoma is not covered.
Installation notes
The front strut spacers change the front height, and the rear add-a-leaf changes the rear spring rate and ride height, so the rear should be checked for level after installation. A wheel alignment should follow the front change.
What’s included
The kit’s lift components are steel front strut spacers and a rear add-a-leaf. Check the box contents against your installation before starting.









