Overview
The ReadyLift 69-6825 is a 2.5-inch front and 2.0-inch rear SST coil spring spacer lift kit for the Jeep Wrangler JL Rubicon. It fits 2018 and 2019 and 2021 and 2022 Wrangler JL Rubicon two-door models and Unlimited Rubicon four-door models. The lift height is suited to running up to 37-inch tall tires on the JL Rubicon.
The kit keeps the factory coil springs and shocks in service. It includes two front and two rear heavy-duty top mount coil spring spacers, so the coil springs Jeep developed for the JL stay in use. Front and rear shock extensions provide slight angle correction. The JL Rubicon fenders offer more tire clearance than the Sahara and Sport versions.
Key features
- 2.5 inches of front lift from coil spring spacers
- 2.0 inches of rear lift
- Heavy-duty top mount spacers, two at the front and two at the rear
- Front and rear shock extensions with angle correction
- Bump stop extensions sized for full articulation
- Clearance for 37-inch tall tires on the Rubicon
Suspension angles and flex
Top mount coil spring spacers raise the body without changing the springs themselves, but they shift the angle at which the shocks and control arms operate. A changed angle affects ride, steering and how the axles sit at full droop, which is why an alignment and driveline check belong to the install. Look for signs of shock binding or rubbing near the spacers after the first drives.
Off-road use adds load to the bump stops, shock mounts and sway bar links, which are all worth inspecting on a regular schedule. A taller stance also changes how the vehicle sits when loaded with gear, so check the factory tire rub points and brake line length. Tire pressure and tread wear deserve more frequent checks after a change in height.
- Inspect shock mounts and extensions for wear
- Check bump stop extensions at full flex
- Confirm brake lines have enough length at full droop
- Schedule an alignment after the install
Specifications
| Brand | ReadyLift |
|---|---|
| Part number | RDY69-6825 |
| Front lift | 2.5 inches |
| Rear lift | 2.0 inches |
| Front and rear spacers | Heavy-duty top mount coil spring spacers |
| Shock extensions | Front and rear, with angle correction |
| Tire clearance | Up to 37-inch tall tires on Rubicon |
| Lift height range | 0 to 3.5 inches |
| Fitment type | Direct fit |
Vehicle fitment
It fits 2018 to 2019 and 2021 to 2026 Jeep Wrangler JL Rubicon two-door models and Unlimited Rubicon four-door models.
The 2020 Wrangler JL is not covered. Sport and Sahara versions need a different ReadyLift kit. Match your year, model and trim to this kit before ordering.
Installation notes
Replacing the spring seats with top mount spacers and fitting extended shock extensions changes the suspension angles, so an alignment and a check of the driveline angles belong after installation. The bump stop extensions should be checked for clearance at full flex.
What’s included
The kit includes the front and rear heavy-duty top mount coil spring spacers, the front and rear shock extensions and the front and rear bump stop extensions.









