Replacement Headlights, Tail Lights & Bulbs
Showing 37–48 of 211 resultsSorted by popularity
-
-
Tail & Brake Lights
Rough Country 60″ Premium Quad-Row Multi-Function LED Tailgate Light Strip – 78860
Tail & Brake LightsRough Country 60″ Premium Quad-Row Multi-Function LED Tailgate Light Strip – 78860
- Rough Country 60-inch Quad-Row LED tailgate light strip, part number R/C78860
- Brake, running, reverse and turn signal functions from one strip
- Fits Chevrolet Silverado, GMC Sierra, Ford Super Duty, Jeep Gladiator, Nissan Frontier and Titan, Toyota Tundra
- 4-pin plug-in connector, IP68 waterproof, 3-year limited warranty
SKU: R/C78860 -
Tail & Brake Lights
Rigid Industries Chase Tail Light (Blue) – 90144
- Rear-facing LED Chase light in blue, part number RIG90144
- Combines reverse, courtesy, strobe, running and brake lights in one housing
- 715 lumen white center light for reverse or area lighting
- Universal fit, not vehicle-specific
SKU: RIG90144 -
-
Replacement Headlights, Tail Lights & Bulbs
Recon Projector Headlights CCFL (Smoke) – 264195BKCC
- Recon Projector Headlights with CCFL technology in smoke, part number REC264195BKCC
- Sold as a set with H1 style bulbs for low beam and high beam
- Description names 07-13 Chevrolet Silverado; fitment label reads Universal Fit
- Four standard halogen bulbs already installed
SKU: REC264195BKCC -
Replacement Headlights, Tail Lights & Bulbs
Recon Projector Headlights CCFL (Clear) – 264272CLCC
- Recon 264272CLCC clear CCFL projector headlights with halo
- Offers a 40% light output improvement over factory OEM headlights
- Four standard halogen bulbs installed.
- Vehicle list not confirmed; check Recon specifications
SKU: REC264272CLCC -
Replacement Headlights, Tail Lights & Bulbs
Recon Projector Headlights (Clear) – 264194CL
- Recon Projector Headlights in clear, part number REC264194CL
- Sold as a set with H1 style bulbs for low beam and high beam
- Four standard halogen bulbs already installed
- Labeled Universal Fit with no vehicle named
SKU: REC264194CL -
Replacement Headlights, Tail Lights & Bulbs
RECON Projector Headlights – 264400BKC
- Recon 264400BKC smoke projector headlight assembly for Chevrolet Tahoe
- Fitment list: 2015–2017 Chevrolet Tahoe in LS, LT, LTZ, PPV, Premier and SSV
- Low beam uses OEM HID bulb and ballast, high beam a 9005 bulb
- Three high-beam upgrade options listed
SKU: REC264400BKC -
Replacement Headlights, Tail Lights & Bulbs
RECON Projector Headlights – 264272BKC
- Direct-fit projector headlights for 2011–2016 Ford F-250 and F-350 Super Duty
- Recon part number REC264272BKC, smoke finish
- Comes with 4 standard halogen bulbs already installed
- Low beam uses an H7-style bulb and high beam uses an H1-style bulb
- LED, HID, DW, PB and SY bulb upgrades are needed separately
SKU: REC264272BKC -
-
Tail & Brake Lights
Recon LED Tail Light Assembly (Red Smoked) – 264373RBK
- Recon LED tail light assembly with red/smoke lens, part number REC264373RBK
- Direct fit for 1999–2007 Chevrolet Silverado and GMC Sierra pickups, including Classic and HD models
- Recon lists smoke, clear, red and red/smoke lens options
SKU: REC264373RBK -
Types of lighting parts here
The category spans complete assemblies and individual bulbs. Assemblies include sealed or projector headlights, round 7-inch units, LED and halogen tail lights, third brake lights and side or roof markers. Bulbs range from basic incandescent types to halogen, xenon-style halogen and LED replacements. Mounting rings, harnesses and housings for round lamps appear as well.
Choosing a bulb or conversion kit
Start with the bulb base type, such as H7, H11, 9006 or 9012, listed in your owner's manual or on the existing bulb. A wrong base will not seat or lock correctly. LED conversions need more care than direct halogen swaps. A halogen housing has a reflector designed around a filament, so an LED with a poor beam pattern can scatter glare toward oncoming drivers. Projector housings usually control an LED more predictably than reflector housings.
- Look for CAN bus compatibility or resistors if the vehicle flags bulb-out warnings.
- Check that the LED driver or heat sink fits behind the housing.
- Confirm the color temperature, since very blue light often reduces useful output in rain and fog.
Tail lights and brake lights
LED tail lights respond faster than filament bulbs and can use less power. Direct-fit sets plug into the factory connector, while universal units such as heated stop, tail and turn lights usually need a wiring harness. Verify lens color and the legal required functions on your vehicle, including stop, turn, tail and reverse.
Installation and aiming
Many bulb swaps are simple, but assemblies can require removing a grille or bumper cover. Disconnect the battery for wiring work, avoid touching halogen glass with bare fingers, and seal housings correctly to prevent moisture. After installing new headlights, re-aim them so the beam cutoff is correct. Lighting equipment rules, color restrictions and DOT or SAE marking requirements vary by state, so check local regulations. Confirm fitment for your exact year, make and model.
Before buying, compare housing style, lens color, bulb base and connector type across the listings. Keep the old assemblies until the new lights are confirmed working, and check that both sides match in color and brightness after a few weeks of use, since mixed ages of bulbs can look uneven.
Common mistakes to avoid
One mistake is buying a bulb by color alone. Two bulbs with the same base can have different wattage and heat output, and a high-wattage replacement can melt a connector or housing designed for lower power. Another is skipping the aim adjustment, which leaves new lights pointing too high or too low. Check aim against a wall at a measured distance, with the vehicle parked on level ground and at normal load.
Moisture is a frequent failure cause. Leave vent caps open and reseal the back of a housing carefully, and replace worn gaskets rather than reusing them. Put a thin layer of dielectric grease on connectors to resist corrosion, which also helps tail light sockets that have turned green. If a light flickers, check the ground connection before replacing the unit.
Finally, keep in mind that headlights lose clarity with age. A cloudy lens may only need polishing and a UV sealant, not replacement.
Popular Replacement Headlights, Tail Lights & Bulbs brands
- Hella (46)
- Oracle Lighting (39)
- Spyder Auto Group (37)
- Anzo (23)
- Putco (17)
- Recon (16)
- JW Speaker (14)
- Morimoto (6)
- DV8 Offroad (2)
- In Pro Carwear (2)
- ARB 4x4 Accessories (2)
- KC HiLites (1)
Shop Replacement Headlights, Tail Lights & Bulbs by type
Replacement Headlights, Tail Lights & Bulbs FAQ
How do I find my headlight bulb size?
Check the owner's manual, look for the number stamped on the base of the existing bulb, or consult the manufacturer's specifications for your year, make and model. High and low beams may use different bulb types.
Can I put LED bulbs in halogen headlights?
Many people do, but results vary. Halogen reflectors are designed for a filament, so some LED bulbs create glare and a poor beam pattern. Projector housings generally work better, and the beam should be re-aimed after installation.
Why does my vehicle show a bulb-out warning with LEDs?
LEDs draw less current than incandescent bulbs, so the vehicle's monitoring may read a fault. Load resistors or CAN bus compatible bulbs are the usual fix, depending on your vehicle.
Are replacement tail lights legal?
Rules differ by state. Generally lights need the correct colors, brightness and functions and often DOT or SAE markings. Check your local regulations before replacing factory lights with aftermarket designs.










